Please noted, this tool is for the rotor size of M33 x P1.5 Right Thread, inner size is about 31.7mm
Magneto Rotor Remover used on CF250 CN250 engines.
Remember that a flywheel is not intended to just "fall off" easily. So do not just keep turning the tool if nothing is happening. You risk either bending the bolt or stripping something if you just keep turning the tool if nothing is happening. Use the heavy hammer on the head of the bolt and then tighten again. Repeating this procedure until the flywheel is safely removed. Impact driver should only be used as a last resort!
Once the tool is tight - use a 3lb sledge hammer and firmly strike the head of the center bolt of the tool. This is should make removal easier. Make sure you measure the threads on your flywheel and compare to 33mm that this tool fits.
Mortch Motor parts supported the Brands of
BAOTIAN, BASHAN, BENZHOU, CFMOTOR, CHARMING, DAYANG, DINLI, FUXIN, GEELY, GILERA, HANGLONG, HAOJIN, HAOJUE, HISUN, HONGZHOU, HUATIAN, JIAJUE, JIANSHE, JINLUN, JMSTAR, JONWAY, KAITONG, KEEWAY, KINROAD, KYMCO, LIFAN, LINGBEN, LINGTIAN, LINHAI, LINTEX, LONCIN, LONGJIA, MAWI, MEIDUO, MOTORRO, PIAGGIO, QINGQI, RHON, RIEJU, SACHS, SHINERAY, SKYGO, SUKIDA, TAOTAO, VESPA, VONROAD, WANGYE, WONJAN, XINGYUE, XINLING, XINTIAN, YIBEN, YINGANG, ZHONGYU, ZNEN, ZONGSHEN, etc.
Note:
1. Please make sure this parts fits your particular model. Many bikes have the same name but use different parts depending on the year of manufacture.
2. The photos and measurements are for your reference only, and the goods is subject to the real product which you will receive.
3. Import duties, taxes and other customs related charges are not included. Buyers bear all responsibility for all extra charges incurred (if any).