Lock Sets for Falcon

Brand: Mortch Motor
Product Code: LKFA-005

Product Viewed: 258

Availability: In Stock

Weight: 0.53kg

Packing Size: 10.00 x 15.00 x 7.00cm

0 reviews / Write a review

US$7.15 249 SOLD

Shipping To：

More Quotes

Falcon Scooter Lock Set

🔐 Ignition Switch · 4-Pin 4-Wire · Seat Lock · Key Set

For Falcon series scooters · OEM quality replacement · Red/Green/Black/Black-White wires · Includes 2 keys

📋 Product Overview

Wear and tear over time, attempted theft, lost keys - there are many reasons why someone might need new locks for their scooter. With this complete Falcon lock set, we can offer you an OEM quality replacement that brings back full usability.

Simply install in place of the old or worn parts and the safety is back. This lock set comes complete with the ignition switch, seat lock, and two keys. The ignition switch features a 4-pin, 4-wire connector with wire colors: Red, Green, Black, and Black/White. It is recommended to keep the spare key in a safe place.

✨ Core Functions: Ignition control · Seat lock · Theft protection · One-key solution

🛵 Compatible Models

This lock set fits the following Falcon series scooters and many other models:

🏍️ Falcon Series

Falcon E Falcon GOLD Falcon I Falcon II Falcon III Falcon IV Falcon KING Falcon V Falcon VII

and other Falcon series scooters

Other compatible models:

• Baja SC150

• Falcon Scooter

• JMstar Eagle

• Jonway Epsilon 150

• Lance GS-R 150

• Longbo LB150t-12

• Roketa Fiji

• Tank Racer

• TNG DR150

• Vento Phantom

• And many more

📌 Compatibility Note: This lock set features a 4-pin, 4-wire ignition switch with Red, Green, Black, and Black/White wires. It fits Falcon series and many other scooters on the same platform. Please verify your vehicle model and wire colors before purchase. Images are for reference only; actual product may vary.

📦 Set Contents

🔑

Ignition Switch

4-pin, 4-wire connector
Red/Green/Black/Black-White

🪑

Seat Lock

For opening the seat storage compartment

🗝️

Two Keys

Keep the spare key in a safe place

Note: Both the ignition switch and seat lock use the same key for convenience.

🔌 Wiring Diagram (4-Pin 4-Wire)

Red

Power Positive (12V DC)

Green

Ignition Signal / Accessory

Black

Ground / Negative

Black/White

Ignition Control / Kill Wire

Note: Functions may vary slightly by model. Refer to your vehicle's wiring diagram.

⚠️ Common Reasons for Lock Replacement

Natural wear: Internal lock cylinder wear from long-term use, key feels loose or turning is rough.
Lost keys: Keys missing, unable to start the vehicle or open the seat.
Attempted theft: Lock cylinder damaged by tampering, unusable or unsafe.
Broken key: Key snapped off inside the lock,无法取出.
Inconvenient multiple keys: Want to unify ignition and seat keys.

When encountering these situations, replacing with this lock set is the simplest and most effective solution.

✨ Product Features

OEM quality: Manufactured to OEM specifications, reliable and durable.
Complete set: Includes both ignition switch and seat lock - solves all lock problems at once.
One-key solution: Both locks use the same key for convenient daily use.
Easy installation: Direct replacement for original locks, no modifications needed, simple tools required.
Clear wire colors: Red, Green, Black, Black/White wires for easy identification.
Restored security: New locks ensure vehicle theft protection for peace of mind.

🔧 Installation Tips

1. Disconnect the battery negative terminal before installation to avoid shorts.
2. When removing the old ignition switch, note the wire connections (take a photo for reference).
3. When installing the new ignition switch, connect wires according to colors: Red, Green, Black, Black/White.
4. Ensure the 4-pin connector is securely plugged in.
5. When replacing the seat lock, pay attention to the cable connection.
6. After installation, test all lock functions: ensure ignition works properly and the seat opens and closes smoothly.

⚠️ Important Notice: This product is a Falcon scooter lock set, compatible with Falcon series and many other models including Baja SC150, JMstar Eagle, Jonway Epsilon 150, Lance GS-R 150, Longbo LB150t-12, Roketa Fiji, Tank Racer, TNG DR150, Vento Phantom and more. The ignition switch features a 4-pin, 4-wire connector with Red, Green, Black, and Black/White wires. Please verify compatibility with your vehicle and wire colors before installation. If you need assistance with electrical connections, consult a professional technician. Images are for reference only; actual product may vary.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.

Tags: Ignition, Key, Lock