Air Filter Cavity Intake Pipe
- Brand: Mortch Motor
- Product Code: MICF0JYV-114000-4100
- Product Viewed: 2
- Availability: Pre-Order🔔
- Weight: 1.25kg
US$49.21
| Shipping To： |
🔧 CFMoto Air Filter Cavity Intake Pipe
📦 Part Number: 0JYV-114000-4100-20
⚙️ Intake Plenum Pipe · Air Filter Connector · OEM Specification
📍 Installation Position: Air Filter · Intake Duct
✅ OEM Quality · Oil & Heat Resistant · Reliable Seal · Direct Replacement
This product is a CFMoto Air Filter Cavity Intake Pipe, part number 0JYV-114000-4100-20. This is an OEM-specification intake system component designed to connect the air filter housing to the throttle body or engine intake port — an essential part of the engine's intake system.
The intake pipe (plenum intake pipe) routes filtered, clean air from the air filter to the engine while also providing air stabilization and noise reduction. Over time, the rubber intake pipe can harden, crack, or deform due to heat, oil exposure, and aging — leading to intake leaks, lean fuel mixture, power loss, and unstable idle. This product is manufactured from high-quality rubber materials to exact OEM specifications, ensuring intake system sealing and airflow stability — the ideal replacement for the original part.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Pipe diameter, bend angles, and mounting interfaces are identical to genuine parts, ensuring a perfect replacement and reliable intake sealing.
This Intake Pipe (0JYV-114000-4100-20) is compatible with the following CFMoto SSV models:
- CF1000STR-3L · ZForce 950 Sport-4 (2024 · 2025 · 2026)
- CF1000SZ-3 · ZForce 950 Trail (2023 · 2024 · 2025)
- CF1000SZ-3A · ZForce 950 Sport (2023 · 2024 · 2025)
- CF1000SZ-3L · ZForce 950 Sport 4 (2024 · 2025)
- CF1000UTR-6(T1b) · ZForce 950 Sport (2023 · 2024 · 2025 · 2026)
📌 Fitment Note: This intake pipe is designed for the CFMoto SSV models listed above. Pipe length and bend angles may vary slightly across different model years or sub-models. We recommend verifying compatibility using your VIN or confirming the original part number before purchase. If your specific model is not listed, please contact us with your VIN for compatibility verification.
- ✅ OEM Specification: Manufactured to CFMoto original technical standards — dimensions, angles, and interfaces are perfectly matched.
- 🛡️ Oil & Heat Resistant Rubber: High-quality rubber material maintains elasticity and sealing integrity in high-temperature engine bay environments.
- 🔧 Reliable Sealing: Precision-molded interfaces ensure an airtight connection between the air filter and throttle body — preventing unfiltered air from entering the engine.
- 🌬️ Intake Stabilization: Optimized internal chamber design helps stabilize airflow and reduce intake pulsation for smoother engine operation.
- 🔄 Direct Replacement: OEM dimensions allow direct replacement of aged, cracked, or damaged intake pipes — no modifications required.
• Cracks, hardening, or deformation visible on the intake pipe surface.
• Unstable idle, poor acceleration, or noticeable power loss.
• Hissing sound from the intake system indicating an air leak.
• Visible damage or poor sealing at the pipe connection points.
• As part of routine maintenance or during intake system service.
Replacing an aged intake pipe promptly ensures intake system sealing, restores engine power, and improves fuel economy.
1. Disconnect the old intake pipe from both the air filter and throttle body.
2. Clean the mounting interfaces — remove old sealant or residue.
3. Install the new intake pipe, ensuring both ends are fully seated.
4. If equipped with hose clamps, tighten evenly to OEM torque specifications.
5. After installation, start the engine and check for air leaks and stable idle.
Professional installation by a qualified technician is recommended. Improper installation may cause intake leaks or engine performance issues.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Air Filter Cavity Intake Pipe
Related Products
A-Type Screw Clamp for Air Filter
MICF9010-020007
CFMoto A-Type Screw Clamp for Air Filter OEM Part Number 9010-020007 Air filter connecting hos..
A-Type Screw Clamp for Air Filter
MICF9030-000109
CFMoto Type-A Screw Clamp for Air Filter OEM Part Number 9030-000109 Specification: 70-90mm ..
Air Filter Element
MICF0JYV-112100-5001
CFMoto Air Filter Element OEM Part Number 0JYV-112100-5001 🌬️ Air Filter Element Size: 150m..
Front Exhaust Pipe Lower Heat Insulator
MICF9DS#-021102-6000
🔧 CFMoto Front Exhaust Pipe Lower Heat Insulator 📦 Part Number: 9DS#-021102-6000 🛡️ Front Exha..
Front Exhaust Pipe Upper Heat Insulator
MICF9DS#-021101-6000
🔧 CFMoto Front Exhaust Pipe Upper Heat Insulator 📦 Part Number: 9DS#-021101-6000 🛡️ Front Exha..
A-Type Screw Clamp 27-51mm
MICF7030-021305
🔧 CFMoto A-Type Screw Clamp 27-51mm 📦 Part Number: 7030-021305 🔩 Specs: 27-51mm · A-Type Clamp..