CVT Cover Gasket

🔧 CFMoto CVT Cover Gasket

📦 Part Number: 0GSV-013104-3000

⚙️ CVT Cover Gasket · CVT Seal · OEM Spec

📍 Installation Location: CVT transmission / Between CVT cover and housing

✅ Single unit · Premium sealing material · Direct fit · Compatible with multiple CFMoto ATV models

This is a CFMoto OEM-spec CVT Cover Gasket, part number 0GSV-013104-3000, sold as a single unit. This gasket is a critical sealing component of the CVT (Continuously Variable Transmission), installed between the CVT cover and housing. It seals the CVT case to prevent lubricating oil from leaking out, while keeping dust, moisture, and contaminants from entering the CVT — ensuring proper lubrication and reliable operation of the CVT system.

Over time, the original gasket may age, harden, become brittle, or lose elasticity under high temperatures, oil pressure, and chemical exposure — leading to seal failure and oil leaks that could cause CVT damage. Replacing with an OEM-spec CVT cover gasket is essential to restore CVT sealing performance and transmission reliability.

• ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; dimensions, thickness, and material match the genuine part exactly.
• 🛡️ Premium Sealing Material: Made from oil-resistant, high-temperature-resistant, aging-resistant sealing material for long-term sealing reliability.
• 🔧 Direct Fitment: Direct replacement for the original part — no cutting or modifications required.
• 💪 Reliable Sealing: Effectively prevents CVT oil leaks and keeps contaminants out of the transmission housing.
• 🔄 Direct Replacement: Replaces aged, hardened, or damaged original gaskets.

✅ Typical signs you need to replace the CVT Cover Gasket:
• Oil leaks around the CVT housing (visual inspection).
• CVT oil level drops frequently with no other leaks found.
• Gasket shows aging, hardening, brittleness, or damage (visible when removed).
• CVT cover bolts are loose or there are oil stains on the sealing surface.
• When removing the CVT cover for service, replace the gasket at the same time.
If any of these occur, replace the CVT cover gasket promptly to ensure reliable transmission sealing.

✅ Installation Tips:
1. Confirm the gasket is the correct 0GSV-013104-3000 matching the original.
2. Remove the CVT cover mounting bolts and take off the cover.
3. Remove the old gasket and clean the sealing surfaces on both the cover and housing.
4. Position the new gasket correctly on the housing sealing surface, ensuring proper alignment.
5. Reinstall the CVT cover and torque the mounting bolts to OEM specifications in the correct sequence.
6. Fill with the specified CVT fluid type and capacity.
7. Start the engine and check the CVT housing area for leaks.
Installation requires mechanical skill; professional installation recommended.

⚠️ Important Note: This product is a CFMoto CVT Cover Gasket, part number 0GSV-013104-3000, sold as a single unit. Fits the listed CFMoto ATV models. Slight variations may occur between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may vary. Ensure sealing surfaces are clean and torque bolts to OEM specifications during installation.