Front Gear Case Bracket
- Brand: Mortch Motor
- Product Code: MICF9010-037400
- Product Viewed: 2
- Availability: In Stock
- Weight: 1.35kg
US$6.60
| Shipping To: |
🔧 CFMoto Front Gear Case Bracket
📦 Part Number: 9010-037400
⚙️ Front Gear Case Bracket · Front Differential Mount · OEM Spec
📍 Installation Location: Front axle / Front gear case (differential) mounting point
✅ Single unit · Premium metal · Direct fit · Compatible with multiple CFMoto ATV/UTV models
This is a CFMoto OEM-spec Front Gear Case Bracket, part number 9010-037400, sold as a single unit. This bracket is installed on the front axle to secure the front gear case (front differential) to the frame or subframe. It carries and transmits drive torque and road impact loads from the front axle — a critical support component in the 4WD front driveline.
Over time, the original bracket may suffer from metal fatigue, impact damage, or corrosion, leading to deformation, cracks, or worn mounting holes. This can cause the front gear case to shift out of alignment, resulting in driveline noise, abnormal vibration, or even gear damage. Replacing with an OEM-spec bracket is essential to restore front driveline precision and reliability.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Dimensions, mounting hole positions, and material strength are identical to the genuine part, ensuring a perfect replacement and reliable support.
This Front Gear Case Bracket (part number 9010-037400, single unit) fits the following CFMoto ATV/UTV models:
- 2020-2023 CF400ATR-5L(T3b) · IRON MAX T3
- 2011-2016 CF500 · X5
- 2008-2016 CF500-2 · X5
- 2008-2016 CF500-2A · X5
- 2010-2014 CF500-5B · X5
- 2010-2012 CF500-5C · X5
- 2011-2016 CF500-A · X5
- 2016-2019 CF500ATR-3 · CForce 520 / 550
- 2015-2016 CF500ATR-A · CForce 550
- 2016-2019 CF500AU-6B · CForce 550
- 2016-2021 CF500AU-6L · CForce 550
- 2017 CF500AU-8S · COBALT L7e
- 2019-2020 CF600ATR-L(T3a) · CForce 600
- 2018-2020 CF600ATR-L(T3b) · CForce 600
- 2019 CF600AU-L · CForce 600
- 2018-2020 CF600AU-L(EU168) · CForce 600
- 2010-2016 CF625-C · Terralander 600 X6
- 2012-2017 CF800-2 · Terralander 800 X8
- 2016 CF800ATR · CForce 800
- 2016-2019 CF800ATR-2 · CForce 820LE
- 2016-2019 CF800AU-2B · CForce 820LE
- 2011-2015 CF500-3 · UForce 500 U5
- 2011-2015 CF600-5 · UForce U6
📌 Fitment Note: This bracket fits the front gear case (differential) mounting point of the listed CFMoto models. Sold as a single unit; purchase multiple as needed. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; dimensions, mounting holes, and material strength match the genuine part exactly.
- 🛡️ High-Strength Construction: Made from premium steel with sufficient rigidity and impact resistance to handle front axle drive torque and road impacts.
- 🔧 Direct Fitment: Bolt-on replacement with no modifications required.
- 💪 Precision Mounting: Ensures accurate front gear case positioning for reliable driveline performance.
- 🔄 Direct Replacement: Replaces bent, cracked, or worn original brackets.
• Unusual noise from the front axle area, especially during turns or in 4WD mode.
• Front gear case is loose or has noticeable movement.
• Bracket shows deformation, cracks, or severe rust (visual inspection).
• 4WD system operates erratically or front wheel power delivery is inconsistent.
• Mounting bolts are loose or mounting holes are worn/elongated.
If any of these occur, inspect and replace the bracket promptly to prevent front gear case damage and 4WD system failure.
1. Confirm the bracket is the correct 9010-037400 matching the original.
2. Raise the vehicle with proper support; front wheel removal may be needed.
3. Support the front gear case to prevent it from dropping when the bracket is removed.
4. Remove the mounting bolts from the old bracket and take it out.
5. Clean the mounting surface and bolt holes, removing any debris.
6. Align the new bracket with the mounting holes, insert bolts, and hand-tighten.
7. Torque all bolts to OEM specifications (refer to the vehicle service manual).
8. Verify the front gear case is properly positioned and the bracket does not interfere with other components.
9. Reinstall the wheels, lower the vehicle, and perform a road test to confirm no noise.
Installation requires professional lifting equipment and mechanical skill; professional installation recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.






Thank You



