Front RH Suspension Assy
- Brand: Mortch Motor
- Product Code: MICF5GYV-450160-1000
- Product Viewed: 13
- Availability: In Stock
- Weight: 0.98kg
US$51.61
| Shipping To： |
🔧 CFMoto Front RH Suspension Assembly
📦 Part Number: 5GYV-450160-1000
⚙️ Front RH Suspension Assy · Suspension Mount · OEM Spec
📍 Installation Location: Front suspension right side · Body to subframe mounting point
✅ Single unit · Premium metal/rubber composite · Direct fit · Compatible with multiple CFMoto SSV Z10 models
This is a CFMoto OEM-spec Front RH Suspension Assembly, part number 5GYV-450160-1000, sold as a single unit. This assembly is installed on the right side of the front suspension system, connecting the body to the subframe (or lower control arm). It carries and transmits vertical, lateral, and longitudinal loads from the front of the vehicle, while absorbing road vibrations through the integrated rubber bushing — a critical load-bearing component of the front suspension system.
Over time, the original suspension mount may fail due to aged/cracked rubber bushings, fatigued or deformed metal components, or bushing wear causing excessive clearance. This can lead to front suspension noise, wheel alignment drift, degraded steering feel, or reduced driving stability. Replacing with an OEM-spec assembly is essential to restore front suspension performance and vehicle safety.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Dimensions, mounting hole positions, and bushing hardness are identical to the genuine part, ensuring a perfect replacement and reliable suspension performance.
This Front RH Suspension Assembly (part number 5GYV-450160-1000, single unit) fits the following CFMoto SSV Z10 series models:
- CF1000SU · Z10
- CF1000SU-L · Z10-4
- CF1000SZ · Z10
- CF1000SZ(AU) · Z10
- CF1000SZ-L · Z10-4
- CF1000STR(T1b) · Z10 Turbo
- CF1000STR-L · Z10-4 Turbo
📌 Fitment Note: This suspension assembly fits the front suspension right side position of the listed CFMoto SSV Z10 series models. Sold as a single unit; purchase multiple as needed. Replacing both left and right sides as a pair is recommended for balanced suspension performance. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; dimensions, mounting holes, and bushing parameters match the genuine part exactly.
- 🛡️ High-Strength Structure: Made from premium steel stamping/welding construction with sufficient rigidity and fatigue life to handle complex front-end loads.
- 🔧 Quality Rubber Bushing: Integrated oil-resistant, aging-resistant rubber bushing effectively absorbs road vibrations and impacts.
- 💪 Direct Fitment: Bolt-on replacement with no modifications required.
- 🔄 Direct Replacement: Replaces original mounts with aged/cracked bushings, deformed metal, or worn-out components.
• Front-end noise during driving, especially on rough roads or when turning.
• Visible aging, cracking, bulging, or extrusion of the right-side bushing (visual inspection).
• Vehicle pulls to one side, uneven tire wear, or wheel alignment drift.
• Noticeable play in the right front suspension — wheel moves when shaken by hand.
• Loose or clunking feeling from the front end when going over speed bumps.
If any of these occur, inspect and replace the suspension assembly promptly to restore front suspension performance and driving safety.
1. Confirm the assembly is the correct 5GYV-450160-1000 matching the original.
2. Raise the vehicle with proper support and remove the right front wheel for access.
3. Support the subframe or suspension components to prevent sagging after removal.
4. Remove the mounting bolts from the old assembly and take it out.
5. Clean the mounting surface and bolt holes, removing any debris.
6. Align the new assembly with the mounting holes, insert bolts, and hand-tighten.
7. Torque all bolts to OEM specifications (refer to the vehicle service manual).
8. Reinstall the wheel, lower the vehicle, and perform a road test to confirm no noise or abnormal vibration.
9. Replacing both left and right sides as a pair is recommended for balanced performance.
Installation requires professional lifting equipment and mechanical skill; professional installation recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Front RH Suspension Assy