Cushion Sleeve

✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Made from high-quality oil-resistant and anti-aging rubber material, with dimensions and mounting interfaces identical to the genuine part, ensuring a perfect fit and long-lasting cushioning performance.

This Cushion Sleeve (part number 6WWV-030019-5000, 2pcs/Pack) fits the following CFMoto motorcycle models:

🔧 Pre-Installation Preparation

• Confirm the new cushion sleeve is part number 6WWV-030019-5000, matching the original.
• Prepare a socket wrench, torque wrench, lubricant (if needed), and clean rags.
• Securely support the vehicle to ensure safe access to the installation area.

🔄 Step 1: Remove the Old Cushion Sleeve

• Remove related connecting components (such as suspension links or engine mounts) to access the cushion sleeve.
• Carefully remove the old sleeve, taking care not to damage the mounting hole or surrounding parts.
• Inspect the metal bushing or mounting hole for damage — repair or replace if necessary.
• Thoroughly clean the mounting area with a clean rag, removing dust, oil, and old rubber residue.

🧽 Step 2: Install the New Cushion Sleeve

• Remove the new sleeve (6WWV-030019-5000) from its packaging and check for any damage or deformation.
• Align the new sleeve with the mounting position, ensuring correct orientation.
• Gently press or slide the sleeve into the mounting hole until fully seated.
• If needed, apply a small amount of rubber-compatible lubricant to the sleeve's outer surface to aid installation.
• Install related connecting components and tighten bolts to factory torque specifications.

✅ Step 3: Post-Installation Check

• Check that the sleeve is fully seated with no twisting or misalignment.
• Confirm all connecting bolts are tightened to factory torque specifications.
• Take a test ride in a safe area to confirm vibration and noise have been significantly reduced.
• After the test ride, re-inspect the installation area to confirm no looseness or abnormalities.

💡 Installation Key Points

• Confirm the sleeve orientation before installation to avoid incorrect fitment.
• If a metal bushing is present, ensure it is in good condition and the inner bore is clean.
• Use a torque wrench to tighten bolts to factory specifications — avoid over-tightening or under-tightening.
• It is recommended to inspect other related cushion components and replace them if necessary.
• If you are not experienced with mechanical repairs, we recommend having this installed by a professional technician.