Dual Gear Axle

Brand: Mortch Motor
Product Code: MICF0180-091006

Product Viewed: 1461

Availability: In Stock

Weight: 0.05kg

0 reviews / Write a review

US$1.67 5 SOLD

Shipping To：

More Quotes

CFMoto Dual Gear Shaft | Includes Linhai Cross-Reference

OEM Part Number 0180-091006 (Old # CF188-091006) | Linhai: 35261 / 1BE-15521-00

Specifications: 12mm x 59mm

Used for dual gear shafts in starter mechanisms or balance shafts, compatible with multiple CFMoto 400cc-600cc engines, and multiple Linhai ATV / UTV models.

📋 Product Overview

This dual gear shaft is a genuine CFMoto quality replacement part, directly replacing OEM part numbers 0180-091006 and old number CF188-091006, also compatible with Linhai part number 35261 / 1BE-15521-00 (AXLE, DUAL GEAR). Dimensions are 12mm x 59mm (diameter × length). This shaft is typically used to mount dual gears in the starter mechanism or balance shaft gears, serving as an important support component for the gear set.

The gear shaft endures radial loads from gear meshing over time. The journal surface may wear, causing increased gear backlash, abnormal noise, or affecting transmission smoothness. During engine overhaul or when noticing unusual starting/running noises, inspect the gear shaft for wear.

✨ OEM Quality: Manufactured from high-quality alloy steel with precision grinding, high surface hardness, and excellent wear resistance, ensuring proper fit with gears and bearing bores.

📐 Specifications & Cross-Reference

CFMoto Part Number 0180-091006
CF188-091006

Linhai Part Number 35261 1BE-15521-00
(AXLE, DUAL GEAR)

Dimensions (Dia×Length) 12 mm × 59 mm

Component Name Dual Gear Shaft

Material Alloy Steel, Surface Hardened

📌 Cross-Reference: CFMoto part number 0180-091006 / CF188-091006 corresponds to Linhai code 35261 / 1BE-15521-00 (AXLE, DUAL GEAR), facilitating multi-system inventory management and ordering.

📦 Kit Contents

1 x CFMoto Dual Gear Shaft (12mm x 59mm)
This product is the gear shaft only, does not include dual gear, bearing, or retaining ring

Note: It is recommended to inspect the original gear, bearing, and retaining ring condition before installation. Replace worn components together for optimal fit.

🔧 Compatible Engines (CFMoto - by Series)

🏍️ 191Q (400cc)

ENGINE 191Q 400cc (2014‑2018)

🏍️ 191R (550cc) – CForce, ZForce, UForce

ENGINE 191R FOR CF500AU-7S&7L 550cc (2016‑2018)
ENGINE 191R-C FOR CF500AU-6B 550cc (2016‑2018)
ENGINE 191R-C FOR CF500AU-8S/8L 550cc (2016‑2018)
ENGINE 191R-U550 550cc (2013‑2018)
ENGINE 191R-X550 550cc (2014‑2018)
ENGINE 191R-Z550 550cc (2014‑2018)

🏍️ 191S / 196S (600cc) – X6, UForce U6, Z6

ENGINE 191S 600cc (2018)
ENGINE 196S-B(U6) 600cc (2011‑2015)
ENGINE 196S-B(X6) 600cc (2010‑2017)
ENGINE 196S-C 600cc (2010‑2017)

🏍️ CF188 (500cc) – X5, UForce 500

ENGINE CF188 500cc (2010‑2017)
ENGINE CF188-A 500cc (2010‑2015)
ENGINE CF188-B 500cc (2010‑2016)
ENGINE CF188-C 500cc (2011‑2013, 2015)

📌 Compatibility Note: This dual gear shaft is suitable for the engines listed above, covering 400cc, 500cc, 550cc, and 600cc displacements. Please verify your engine model and year, as well as the original shaft dimensions (12mm x 59mm), before ordering.

🔧 Vehicle Fitment (Linhai)

Linhai T-BOSS 550 E4
Linhai 500 PROMAX T3b
Linhai M550 E2
Linhai M550L E2
Linhai 500 E2
Linhai M550L E4
Linhai 500 T3b EFI
Linhai 500 E4
Linhai 500 T3b
Linhai T-BOSS 550 E4 (EPS)
Linhai 500 PROMAX E4
Linhai M550 E4
Linhai Landforce 550L, Landforce 550L ABS

📌 Linhai Compatibility Note: This dual gear shaft is suitable for the Linhai ATV / UTV models listed above. The corresponding Linhai part number is 35261 / 1BE-15521-00 (AXLE, DUAL GEAR).

⚙️ Product Features

Direct OEM Replacement: Perfectly matches CFMoto original part numbers 0180-091006 / CF188-091006, also corresponds to Linhai 35261 / 1BE-15521-00 for precise fitment.
Premium Alloy Steel: Manufactured from high-strength alloy steel with excellent bending strength and fatigue resistance.
Precision Ground: Journal surfaces are precision ground for high surface finish, ensuring proper fit with bearings or housing bores.
Surface Hardened: Critical areas are hardened for improved wear resistance and extended service life.
Critical Gear Support: Provides stable support for dual gears, ensuring gear meshing precision and reducing noise.
Cross-Platform Compatibility: Suitable for both CFMoto and Linhai platform engine transmission systems.

✅ Importance of Gear Shaft Replacement: The gear shaft endures radial forces from gear meshing over time. The journal surface may wear, causing increased gear backlash, abnormal noise, and potentially affecting transmission smoothness and reliability. During engine overhaul or when noticing unusual starter or balance shaft noise, inspect the gear shaft for wear and replace if necessary.

🔧 Installation Guide

Installation Overview:

Disconnect the vehicle battery negative terminal for safety.
Remove the relevant engine side cover or transmission case (refer to the vehicle service manual).
Remove the original dual gear shaft and inspect the gear, bearing, and retaining ring for wear or damage.
Clean the mounting bore and lubrication areas.
Install the new dual gear shaft, ensuring smooth fit with the bearing or housing bore.
Install the retaining ring or dowel pin (if applicable) and check axial clearance.
Reinstall the side cover, connect the battery, and start the engine to check for abnormal noise.

⚠️ Installation Note: Before installation, inspect the gear bore for wear and replace the gear if necessary. Ensure the shaft is fully seated during installation, and correctly install any retaining ring or dowel pin.
🔄 Linhai Cross-Reference: 35261 / 1BE-15521-00 has been integrated for cross-system inventory management.

📑 Complete Part Number Cross-Reference Summary:

Dual Gear Shaft (Axle, Dual Gear): CFMoto 0180-091006 / CF188-091006 | Linhai 35261 / 1BE-15521-00 | Specifications 12×59mm

This dual gear shaft is suitable for CFMoto and Linhai platform engine transmission systems. A critical support component for dual gears in starter mechanisms or balance shafts, offering OEM quality reliability and durability.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.