Magneto Rotor Remover M50 x P1.5 Right Thread

Please noted, this tool is for the rotor size of M50 x P1.5 Right Thread, inner size is about 48.5mm

Remember that a flywheel is not intended to just "fall off" easily. So do not just keep turning the tool if nothing is happening. You risk either bending the bolt or stripping something if you just keep turning the tool if nothing is happening. Use the heavy hammer on the head of the bolt and then tighten again. Repeating this procedure until the flywheel is safely removed. Impact driver should only be used as a last resort!

Once the tool is tight - use a 3lb sledge hammer and firmly strike the head of the center bolt of the tool. This is should make removal easier. Make sure you measure the threads on your flywheel and compare to 50mm that this tool fits.

• For Suzuki: LT-A400 Eiger 2X4 Auto 02-07 | LT-A400F Eiger 4X4 Auto 02-07 | LT-A400F Kingquad As 08-10 | LT-A450X Kingquad Axi 4X4 07-10 | LT-A500 Kingquad Axi 2011 | LT-A500 Kingquad Axi Power Steering 09 | LT-A500 Kingquad Axi Power Steering 11 | LT-A500F Quadmaster 00-07 |
• For LTA700X Kingquad 4X4 05-07 | LT-A750X Kingquad AXI 4X4 09 | LT-A750X Kingquad AXI 4X4 11 | LT-F400 Eiger 2X4 02-08 | LT-F400F Eiger 4X4 02-08 | LT-F400F Kingquad Fs 08-11 | LT-F400F Kingquad FS 10-17 | LT-F500F Quadrunner 4X4 98-07 | DR650Se 96-17 | GV1400 Cavalcade 86-88 | LS650 Savage 87-97 | LS650 Savage 99-09 | VX800 90-93
• For Prowler HDX 700 Limited 14 | Prowler Hdx 700I 12-13 | Prowler XT 550 14-15 | Prowler XT 550I 12-13 | Prowler XTx 700 14 | Prowler XTx 700I 12-13 | Prowler XTZ 1000 14-17 | Prowler XTZ 1000I 12-13 | Wildcat 1000 12-15 | Wildcat 1000 LTD 13-14 | Wildcat 4 1000 13-14 | Wildcat 4 LTD 14 | Wildcat 4X 14-17 | Wildcat 4X LTD 14-15 | Wildcat Trail XT 14-17 |
• For Wildcat Trail 14-17 | Wildcat X 1000 13-15 | Wildcat X LTD 14-17 | Prowler XT 700 15-17 | Wildcat Trail LTD 15-17 | Wildcat Sport 15-16 | Wildcat Sport LTD 15-17 | Wildcat Sport XT 15-17 | Wildcat Sport