Oil Pump Gasket

CFMoto Oil Pump Gasket

OEM Part Number 0180-070002 (Old P/N: CF188-070002)

High-quality sealing gasket for the oil pump to engine crankcase interface, preventing oil leaks.

This oil pump gasket is a high-quality OEM replacement for CFMoto, directly replacing part numbers 0180-070002 and the older CF188-070002. It is installed between the oil pump and the engine crankcase to ensure the pump can establish and maintain proper oil pressure by preventing oil leakage from the mating surface.

The oil pump gasket is a critical seal in the engine lubrication system. Constantly exposed to high-temperature, high-pressure oil, the gasket material can harden and lose its elasticity over time, leading to oil seepage, pressure loss, and potentially severe engine damage due to inadequate lubrication.

• Direct OEM Replacement: Perfectly matches CFMoto part numbers 0180-070002 and CF188-070002, guaranteeing accurate fitment.
• Premium Composite Material: Made from oil and heat-resistant composite to maintain sealing integrity in harsh engine environments.
• Precision Die-Cut: Accurate gasket profile with correctly positioned bolt holes and oil passages for interference-free installation.
• Prevents Oil Leakage: Effectively seals the oil pump to crankcase interface, preventing leaks and maintaining proper oil pressure.
• Essential for Overhauls: Always replace this gasket when removing the oil pump or during engine rebuilds to ensure a reliable seal.

✅ Importance of Oil Pump Gasket Replacement: Gaskets harden, shrink, and lose elasticity over time due to constant exposure to high-temperature, high-pressure oil, leading to seal failure. Oil leaks not only reduce oil volume but also cause a drop in oil pressure, increasing the risk of engine wear. Always install a new gasket after any oil pump removal to prevent leaks from a reused, compromised seal.

⚠️ Installation Tip: Ensure both the oil pump and engine mating surfaces are clean, flat, and free of old gasket material before installation. Tighten the mounting bolts to the manufacturer's specified torque to avoid damaging the gasket or causing leaks.