Steering Knuckle Assy

Brand: Mortch Motor
Product Code: MICF9060-101170

Product Viewed: 335

Availability: In Stock

Weight: 0.19kg

0 reviews / Write a review

US$15.60 48 SOLD
10 or more US$9.30
50 or more US$7.75
100 or more US$6.72

Shipping To：

More Quotes

CFMoto Steering Knuckle

OEM Part Number 9060-101170

🔧 Steering Knuckle · Front Axle · M10/M12 Thread

OEM quality · Direct replacement · Ensures front wheel alignment & steering

⚠️ Important Change Notice:

CFMoto changed the specification of this steering knuckle from M10/M12 to M12/M14 after 2020. This part is the pre-change version with M10/M12 thread. Please double-check your vehicle's year and required specification before ordering to ensure you receive the correct part.

📋 Product Overview

This is a genuine OEM-spec CFMoto Steering Knuckle assembly, part number 9060-101170 (Thread size M10/M12). The steering knuckle is a critical component connecting the front suspension, wheel hub, and steering linkage. It bears vehicle loads, enables wheel turning, and maintains wheel alignment geometry. This direct replacement part restores front-end accuracy and steering control. Fits various CFMoto ATV, SSV, and UTV models.

✨ Product Type: Steering Knuckle / Upright

✨ Thread Size: M10 / M12 (Note: changed to M12/M14 after 2020)

✨ Installation Location: Front Wheel, connecting suspension and hub

📐 Specifications

OEM Part Number 9060-101170

Type Steering Knuckle Assy

Thread Size M10 / M12

Quality Standard OEM OE Quality

🔧 Vehicle Fitment (Grouped by Type)

This Steering Knuckle (9060-101170 M10/M12) fits the following CFMoto models:

🏍️ ATV Series (CForce-EV110)

ATV 2023-2024 CF15DAY10 CForce-EV110 (incl. AU/CA/GD/HLG/SS/ST/US specs)

🏎️ SSV Series (ZForce)

SSV 2018-2021 CF1000US-2 / CF1000UTR-2 ZForce-1000 (incl. CA specs)
SSV 2021-2022 CF500UTR(T1a/T1b) ZForce-550EX (incl. SS/GD specs)
SSV 2018-2020 CF800 ZForce-800EX (incl. CA/US specs)
SSV 2019-2022 CF800US-A ZForce-800-Trail (incl. CA/US specs)
SSV 2018-2020 CF800UTR ZForce-Z8-EX

🚜 UTV Series (UForce)

UTV 2018-2020 CF1000UTR-3 / CF1000UU UForce-1000 (incl. CA/US specs)
UTV 2017-2021 CF500UTR-2 UForce-550 (incl. GD specs)
UTV 2015-2020 CF500UU UForce-550 / UForce-500 (incl. CA/US specs)
UTV 2015-2025 CF800-3 UForce-800 (incl. CA/US specs)
UTV 2017-2022 CF800UTR-2 UForce-800 (incl. HLG specs)
UTV 2015-2023 CF800UU-A UForce-800 (incl. AU/HLG specs)

📌 Important Note: This part is a Steering Knuckle (M10/M12 thread), part #9060-101170. The list above is based on OEM data. **Please note that after 2020, this part was changed to the M12/M14 specification.** If your specific model is not listed, please verify your original part number or contact our support team to confirm compatibility.

⚙️ Product Features

OEM OE Quality: Manufactured to original specifications, ensuring identical geometry and strength.
Precision Cast/Forged: Made from high-strength ductile iron or alloy steel for structural integrity and durability.
Precision Machined: Critical areas like bearing bores, steering arm interfaces, and brake caliper mounts are precision-machined for accurate component fit.
Direct Replacement: Designed for bolt-on installation – no modifications required, saving time and effort.
Rigorously Tested: Undergoes dimensional and strength testing prior to shipment for reliability.
Restores Handling: Replaces a bent or damaged knuckle, restoring front-end alignment and eliminating issues like pulling and uneven tire wear.

🛑 The Importance of the Steering Knuckle

The steering knuckle is one of the most complex and heavily loaded components in the front suspension. It connects the suspension, wheel, and steering system, bearing the front weight and enduring forces from braking, acceleration, and cornering. Its precise geometry determines critical wheel alignment angles (caster, camber). A bent or cracked knuckle from an impact will cause pulling, abnormal tire wear, and heavy steering. In a worst-case scenario, failure can lead to wheel detachment and a serious accident. Therefore, replacement must be done with OEM-quality parts to ensure safety.

⚠️ Fitment Note: This part is the Steering Knuckle, part #9060-101170, with M10/M12 thread. Important: CFMoto changed this part to the M12/M14 version after 2020. Please verify your vehicle's year and required thread size before ordering. Fits various CFMoto ATV, SSV, and UTV models.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.