EFI Auxiliary Cable
- Brand: Mortch Motor
- Product Code: MICF5BYV-150200-A102
- Product Viewed: 23
- Availability: Pre-Order 1-2 Weeks🔔
- Weight: 0.74kg
US$159.43
| Shipping To： |
🔧 CFMoto EFI Auxiliary Cable
📦 Part Number: 5BYV-150200-A102
⚙️ EFI Auxiliary Cable · EFI Sub-Harness · OEM Spec
📍 Installation Location: Engine compartment / EFI system sensor and actuator connections
✅ Single unit · Premium temperature-resistant wiring · Direct fit · Compatible with multiple CFMoto SSV ZForce models
This is a CFMoto OEM-spec EFI Auxiliary Cable, part number 5BYV-150200-A102, sold as a single unit. This cable harness is an essential component of the Electronic Fuel Injection (EFI) system, connecting the Engine Control Unit (ECU) to various sensors (such as the throttle position sensor, intake air temperature sensor, oxygen sensor, etc.) and actuators (such as injectors, idle air control valve, etc.). It transmits electrical signals and provides power — a critical electrical connection component for proper EFI system operation.
Over time, the original harness may suffer from heat aging, insulation wear, connector oxidation, or poor contact, leading to signal transmission issues that can trigger check engine lights, unstable idle, poor acceleration, or reduced power. Replacing with an OEM-spec EFI auxiliary cable is essential to restore reliable electrical connections in the EFI system.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Wire gauge, connector types, and terminal specifications are identical to the genuine part, ensuring a perfect replacement and reliable electrical connection performance.
This EFI Auxiliary Cable (part number 5BYV-150200-A102, single unit) fits the following CFMoto SSV models:
- 2023-2024 CF1000SZ-D · ZForce 950 HO EX
- 2023 CF1000SZ-E · ZForce 950 HO Sport
- 2023-2025 CF1000UTR-C · ZForce 1000 Sport
📌 Fitment Note: This EFI auxiliary cable fits the EFI system of the listed CFMoto SSV models. Sold as a single unit. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; wire gauge, connector types, and terminal specifications match the genuine part exactly.
- 🛡️ Premium Temperature-Resistant Wiring: Made with heat-resistant, oil-resistant, flame-retardant wiring suitable for harsh engine compartment environments.
- 🔧 Direct Fitment: Connectors match the original perfectly — direct replacement with no modifications required.
- 💪 Reliable Connections: Precision crimped terminals ensure stable signal transmission and reliable power delivery.
- 🔄 Direct Replacement: Replaces aged, worn, or poor-contact original harnesses.
• Check engine light (MIL) is on with sensor or actuator circuit fault codes.
• Engine idle is unstable, acceleration is jerky, or power is reduced.
• Harness insulation shows cracks, wear, or aging (visual inspection).
• Connectors are oxidized, terminals are loose, or there is intermittent contact.
• Intermittent electrical faults persist even after sensor replacement.
If any of these occur, inspect and replace the EFI auxiliary cable promptly to restore proper EFI system operation.
1. Confirm the cable is the correct 5BYV-150200-A102 matching the original.
2. Disconnect the battery negative terminal for safety.
3. Disconnect each sensor and actuator connector from the old harness one by one — note each connector's position.
4. Remove the old harness retaining clips and take out the old harness.
5. Route the new harness along the original path and secure with retaining clips.
6. Connect each connector to its corresponding sensor and actuator, ensuring each plug clicks into place.
7. Verify all connectors are secure and the harness is not pinched or over-stretched.
8. Reconnect the battery, start the engine, and check for warning lights or abnormal operation.
Installation requires electrical knowledge; professional installation recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our EFI Auxiliary Cable