Front Brake Pad Assy

🔧 CFMoto Front Brake Pad Assy (Sintered)

📦 Part Number: 5HYV-0811A0-6000

⚙️ Front Brake Pads · Sintered Metal Formula · OEM Specification

📍 Installation Position: Front Brake Caliper

✅ Sintered Metal Friction Material · High Temperature Resistant · Stable Braking Performance · Suitable for CFMoto UForce Models

This product is a CFMoto OEM specification front brake pad assembly (sintered), part number 5HYV-0811A0-6000. These brake pads are manufactured using sintered metal friction material, offering excellent high-temperature resistance and a stable coefficient of friction, making them ideal for high-intensity, high-load braking conditions. The sintered pads consist of a backing plate, friction material, and shims, produced through precision pressing and high-temperature sintering processes to ensure reliable braking performance, even wear, and low noise.

Over time, brake pads wear thin. When the friction material thickness approaches the wear limit, braking performance degrades, stopping distances increase, and driving safety is compromised. Regular inspection and timely replacement of brake pads are critical to ensuring braking system reliability and driving safety.

• ✅ OEM Original Specification: Manufactured strictly to CFMoto original technical standards. Dimensional accuracy matches original parts completely.
• 🛡️ Sintered Metal Formula: Advanced sintered metal friction material offers excellent high-temperature resistance for high-intensity braking conditions.
• 🔧 Stable Coefficient of Friction: Consistent braking performance in both cold and hot conditions for predictable stopping distances.
• 💪 Even Wear: Precision formula ensures even pad wear for extended service life.
• 🔇 Low Noise Design: Integrated shims effectively reduce brake noise during operation.
• 🔄 Direct Replacement: Directly replaces worn original brake pads.

✅ Typical Signs That Brake Pad Replacement Is Needed:
• Sharp metal squealing noise during braking (wear indicator contact).
• Friction material thickness less than 2mm (near wear limit).
• Noticeably longer stopping distances and reduced braking power.
• Vehicle pulls to one side or steering wheel vibrates during braking.
• Cracks, peeling, or discoloration (burning) on the friction material.
If you experience any of these symptoms, please inspect and replace the brake pads promptly.

✅ Installation Tips:
1. Before replacing brake pads, inspect the brake disc surface for grooves; replace or resurface the disc if necessary.
2. Clean the caliper and slide pins, and lubricate the slide pins with appropriate grease.
3. Compress the piston back into the caliper; note that brake fluid level may rise.
4. When installing new pads, ensure correct inner/outer pad orientation and proper shim positioning.
5. After installation, pump the brake pedal multiple times to reset the pistons and verify braking performance.
6. New brake pads require a break-in period (approximately 200 km/120 miles); avoid hard braking during this time.
⚠️ The brake system is critical to vehicle safety. Professional installation by a qualified technician is strongly recommended.

⚠️ Important Notice: This product is a CFMoto front brake pad assembly, part number 5HYV-0811A0-6000. Suitable for the CFMoto UTV models listed above. Minor variations may exist between production batches. If your specific model is not listed, please contact us with your VIN for compatibility verification. Images are for reference only; actual product may vary.