Outer Ball Joint Sub Assy
- Brand: Mortch Motor
- Product Code: MICF5HYV-105000-6001-20
- Product Viewed: 1
- Availability: In Stock
- Weight: 0.65kg
US$34.67
| Shipping To： |
🔧 CFMoto Outer Ball Joint Sub Assy
📦 Part Number: 5HYV-105000-6001-20
⚙️ Outer Ball Joint · Tie Rod End · Suspension Ball Joint · OEM Specification
📍 Installation Position: Steering System / Suspension System / Knuckle Connection
✅ Precision Machined · High Strength Material · Wear & Impact Resistant · Suitable for Multiple CFMoto UTV Models
This product is a CFMoto OEM specification outer ball joint sub assembly (tie rod end / suspension ball joint), part number 5HYV-105000-6001-20. The outer ball joint is a critical connecting component in the steering and suspension systems, connecting the steering tie rod to the knuckle. It allows steering movement while accommodating vertical articulation, absorbing impacts and loads from the road surface. Manufactured from high-strength alloy steel with precision ground and hardened ball surfaces, it offers excellent wear resistance and impact resistance. Pre-filled grease ensures smooth rotation over time.
Over time, the outer ball joint may experience wear, looseness, boot damage, or grease loss, leading to increased steering play, poor alignment, abnormal noise, or even steering failure, posing a serious safety risk. Timely replacement of a worn or damaged outer ball joint is critical to ensuring precise steering and driving safety.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Ball joint dimensions, torque specifications, and durability are fully consistent with original parts, ensuring perfect replacement and reliable steering performance.
This outer ball joint sub assembly (Part Number 5HYV-105000-6001-20) is compatible with the following CFMoto models:
- CF1000UTR-8 (2025-2026) · UForce 1000 PRO(T1b)
- CF1000UTR-8K (2025-2026) · UForce U10 PRO Highland
- CF1000UTR-8L (2025) · UForce U10 XL PRO
- CF1000UZ-8 (2025) · UForce U10 PRO
- CF1000UZ-8L (2025) · UForce U10 PRO XL
📌 Fitment Note: This outer ball joint sub assembly is suitable for the CFMoto UTV models listed above. If your specific model is not listed, please contact us with your VIN for compatibility confirmation.
- ✅ OEM Original Specification: Manufactured strictly to CFMoto original technical standards. Ball joint dimensions and torque specifications match original parts completely.
- 🛡️ High Strength Alloy Steel: Ball stud made from high-quality alloy steel with hardening treatment for excellent wear and impact resistance.
- 🔧 Precision Ground Ball Surface: Precision ground ball surface ensures smooth rotation and precise fit.
- 💪 Premium Dust Boot: Oil-resistant rubber boot effectively prevents debris and water ingress; pre-filled grease provides long-term lubrication.
- 🔄 Direct Replacement: Directly replaces worn, loose, or damaged original outer ball joints.
• Clunking or knocking noise during steering.
• Poor alignment, excessive steering play, or weak return to center.
• Uneven tire wear (feathering or scalloping).
• Torn dust boot with grease leakage.
• Noticeable play when shaking the wheel with the vehicle lifted.
• Corrosion or severe wear on the ball stud surface.
If you experience any of these symptoms, please inspect and replace the outer ball joint promptly.
1. Lift the vehicle and ensure it is securely supported before replacing the outer ball joint.
2. When removing, take care to protect the dust boot and threads from damage.
3. When installing the new outer ball joint, tighten the nut to OEM torque specifications.
4. A wheel alignment is required after installation to ensure proper toe and camber settings.
5. Verify the dust boot is properly seated with no twisting or damage.
6. Perform a road test after replacement to check for smooth steering and absence of noise.
⚠️ The steering system is critical to vehicle safety. Professional installation by a qualified technician is strongly recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Outer Ball Joint Sub Assy