Fuel Level Sensor Assy

CF Moto 500cc ATV Fuel Level Sensor Assy

Part Number: 9CR6-170200-10000

Product Type: Sensor | Fuel System Component

Original specification fuel level sensor assembly, used to detect the fuel level in the tank and transmit the information to the instrument cluster for display. Manufactured from fuel-resistant materials, ensuring long-term reliable operation. Produced strictly according to CF Moto original technical standards, ensuring dimensional accuracy and electrical performance.

This product is an original quality CF Moto fuel level sensor assembly, part number 9CR6-170200-10000. This sensor is installed inside the fuel tank to detect the fuel level in real-time and convert the level information into an electrical signal sent to the instrument cluster, allowing the driver to accurately monitor the remaining fuel and avoid inconvenience caused by running out of fuel.

The sensor assembly is manufactured from fuel-resistant materials, with a float design that moves freely with fuel level changes, ensuring accurate fuel level detection. Precision resistive elements inside the sensor ensure stable signal output. Produced strictly according to CF Moto original technical standards, it guarantees consistency with the original part in dimensions, electrical performance, and fuel resistance, ensuring reliable fuel system operation and accurate fuel level display.

• Accurate Detection: Float-type design accurately detects fuel level changes.
• Fuel-Resistant Materials: Made from materials resistant to fuel corrosion, ensuring long-term reliable use.
• Stable Output: Precision resistive elements ensure stable and accurate signal output.
• Easy Installation: Original specification design for direct replacement, no modification required.
• Original Standard: Performance and quality fully comply with CF Moto original specifications for accurate fuel level display.

✅ Inspection Tip: Common conditions for fuel level sensors:
• Inaccurate fuel level display or fluctuating gauge.
• Gauge always shows full or empty.
• Float stuck, unable to move with fuel level.
• Poor electrical connection at sensor.
If any of these occur, please inspect and replace the fuel level sensor assembly promptly.

✅ Installation Tip: Ensure the fuel tank is drained or the fuel level is below the sensor mounting port before installation. Carefully remove the old sensor, being careful not to bend the float arm excessively. When installing the new sensor, ensure the sealing ring is properly seated and tighten the mounting screws to the specified torque. Connect the electrical connector, ensuring good contact. Check the fuel level display after refueling.

⚠️ Important Notice: This product is a CF Moto Fuel Level Sensor Assy, part number 9CR6-170200-10000. It is suitable for the CF Moto ATV models listed above. Minor differences may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with the Vehicle Identification Number (VIN) to verify compatibility. Images are for reference only; the actual product may vary slightly due to different batches.