Impeller, Water Pump

CFMoto Water Pump Impeller Kit

OEM Part: 0800-081000 | New Code: 0800-0800A0

Product Type: Cooling System | Water Pump Impeller Assembly

Material: High-Strength Aluminum Alloy

Kit Includes: Impeller + Water Pump Shaft + Mounting Bolt

OEM-specification water pump impeller kit, including the impeller, water pump shaft, and mounting bolt. The impeller is manufactured from high-strength aluminum alloy. Compatible with early CFMoto 800cc series models (X8, CForce 800, ZForce 800EX, UForce 800, etc.). Compared to the original plastic impeller, the aluminum alloy offers superior strength and durability, effectively preventing loosening, cracking, or slippage for reliable engine cooling protection.

This product is a water pump impeller kit for early CFMoto 800cc models, OEM part number 0800-081000, upgraded to the new part number 0800-0800A0. The kit includes the water pump impeller, water pump shaft, and mounting bolt – the core rotating components of the water pump assembly. The impeller is manufactured from high-strength aluminum alloy, offering superior strength, better thermal conductivity, and enhanced fatigue resistance compared to the original plastic impeller. It completely eliminates common issues with plastic impellers such as cracking, loosening on the shaft, or blade deformation due to prolonged high-temperature exposure, significantly improving the water pump's service life and reliability.

📦 Kit Includes:

• 0800-081000 / 0800-0800A0 - Water Pump Impeller (Aluminum) x1
• 0800-080006 - Water Pump Shaft x1
• 0JWA-080007 - Bolt M5X17 x1

✨ Advantages of Aluminum Impeller Upgrade:

• Permanently Solves Common Issues: Original plastic impellers, exposed to hot coolant over time, can age and become brittle, leading to loosening on the shaft, slippage, or even blade breakage. This causes pump failure and engine overheating. The aluminum impeller completely eliminates this problem.
• High Strength, Never Deforms: Aluminum alloy offers exceptional strength and rigidity, handling higher speeds and torque, ensuring a permanent, tight fit with the shaft.
• Superior Thermal Conductivity: The metal impeller transfers heat away from the shaft more efficiently, indirectly improving the operating environment for the water seal.
• Corrosion Resistant: Surface-treated for excellent resistance to coolant corrosion, maintaining performance over the long term.

• OEM Match: Part numbers 0800-081000 / 0800-0800A0 correspond exactly with the CFMoto official parts system, ensuring direct replacement without any modifications.
• Aluminum Alloy Advantage: Made from high-strength aluminum alloy, completely eliminating common issues of plastic impellers like aging, loosening, and cracking, significantly extending service life.
• Efficient Pumping Capacity: Precision-engineered blades with optimized angles and curvature ensure adequate coolant flow and pressure across all RPM ranges.
• Precision Bore Fit: High-precision center bore ensures a tight fit with the included pump shaft, effectively preventing loosening, slippage, or eccentric rotation.
• Corrosion Resistance: Surface-treated for excellent resistance to coolant corrosion, maintaining performance over the long term.
• Complete Kit: Includes impeller, shaft, and mounting bolt - everything needed in one package.

✅ Fault Indications: Common signs of water pump impeller failure include:
• Engine overheating, especially under high load or at idle;
• Insufficient or inconsistent heater output;
• Large temperature difference between upper and lower radiator hoses (indicating poor coolant circulation);
• Upon disassembling the old pump, finding the impeller loose on the shaft, damaged blades, or severe corrosion.
If these occur, inspect and replace the water pump impeller assembly promptly.

✅ Installation Tip: When replacing the impeller kit, it is recommended to also replace seals such as the water seal and oil seal to ensure overall reliability. Clean the pump housing and shaft bore before installation, ensuring they are free of oil and debris. Install the new shaft correctly, then use a proper tool to press the impeller into place, avoiding hammer blows that could cause damage. After installation, check that the impeller rotates freely and test the cooling system for leaks. Professional installation by an experienced technician is recommended.

⚠️ Important Notice: This product is a CFMoto aluminum water pump impeller kit, including impeller (0800-081000 / 0800-0800A0), water pump shaft (0800-080006), and mounting bolt (0JWA-080007). It is applicable for the early 800cc series models listed above. Minor variations may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with your VIN for compatibility verification. Images are for reference only; the actual product may vary.