GN125 Regulator Rectifier
- Brand: Mortch Motor
- Product Code: MIGN125-5069
- Product Viewed: 93
- Availability: In Stock
- Weight: 0.14kg
US$5.34 236 SOLD
| Shipping To: |
Rectifier (voltage regulator) commonly used on SUZUKI GN125 GS125 engines sizes 125cc-150cc.
The purpose of a rectifier is to prevent the capacitor from discharging prior to ignition (turning the key). Upon ignition, the rectifier stops charging the capacitor, allowing the capacitor to transfer the 400-600 Volt charge to the ignition coil.
5 wires:- 2 wires (1 red & 1 black)in one socket (6mm female blades) 3 Yellow in other socket (6mm male blades). 65mm fixing hole centres Dimensions 81x70X11mm
- Please verify that this parts fits your specific vehicle model and year. Many vehicles share similar name but use different parts by year or market, so always double-check your owner's manual or contact us for assistance if you are unsure.
- We strongly recommend cross-checking with your vehicle's manual or contacting us for confirmation before purchasing.
- Product photos, measurements, and descriptions are for reference only. Minor differences in color or appearance may occur due to manufacturing batches or lighting, but the functional specifications will match your ordered part.
- Professional installation is strongly recommended. Mortch Motor is not responsible for damage or injury caused by incorrect installation, misuse, or modification of the product.
- All prices shown do NOT include any import duties, taxes, or customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are the responsibility of the recipient.
- If an order is returned due to unpaid duties/taxes or refusal to clear customs, the buyer will be responsible for the original shipping costs, return shipping fees, and any related charges deducted from the refund.
Tags: Rectifier, Voltage Regulator
Please tell your friends about our GN125 Regulator Rectifier
Related Products
GY6 50cc CDI Unrestricted 11,000rmp
MIGY50-4070A
Capacitor discharge ignition (CDI module) or ignitor is used on very many gas scooters, ATVs, dirt b..
GY6 BaoTian CDI 45Km Restricted 6Pin
MIGY50-4070C
BaoTian C.D.I 45Km Limited 6Pin, this CDI also supported other brands 45km limited scooters. The CD..
GY6 Racing AC CDI 11,000rmp Constant Angle 28°
MIHPCDI-GY6C
This is our Professional Racing CDI. Unlike other Rev-Limiter removal CDI's, This CDI has a aluminum..
GY6 50cc Relay Starting Motor
MIGY50-4068
Relay with 2 wires used on 4-stroke and 2-stroke engines equipped with electric start. Sometimes ref..
GY6 Blinker Module Flasher
MIGY50-4065B
A replacement Turn Signal Flasher for Chinese 50cc-250cc Scooters & Go Karts. 3 wires, 3 pin mal..
GN125 Ignition Unit CDI
MIGN125-5070
Capacitor discharge ignition (CDI module) or ignitor is used on very many ATVs, dirt bikes, motorcyc..
GN125 Ignition Coil + Cap Spark Plug
MIGN125-5066A
Scooter ignition coil spark plug wire for 125cc-150cc SUZUKI GN125/GS125 engines. QTY in Box: 50PCs..
GN125 Ignition Coil
MIGN125-5066B
Scooter ignition coil wire for 125cc-150cc SUZUKI GN125/GS125 engines. QTY in Box: 50PCs/CTN
GN125 Full Set of Gasket 125cc
MIGN125-5064
This 8 piece Gasket kit is perfect for rebuilding your tired chinese built SUZUKI GN125 GS125 engine..
GN125 Half Gasket 125cc
MIGN125-5063
A complete engine half gasket set for 125cc SUZUKI GN125 GS125 engine.
GN125 Cylinder Block
MIGN125-5004
Standard (57mm) Barrel Kit, 157FMI, fits Engines of Chinese made SIZUKI EN125, GN125, GS125, etc. Q..
GN125 Piston Assy
MIGN125-5007
Standard (57.00mm) Piston Kit includes compression and oil control rings as well as gudgeon pin and ..
GY6 125cc 150cc Relay Starting Motor
MIGY125-3079
Relay with 2 wires used on 4-stroke and 2-stroke engines equipped with electric start. Sometimes ref..
GY6 125cc 150cc CDI Unrestricted 11,000rmp
MIGY125-3080
Capacitor discharge ignition (CDI module) or ignitor is used on very many gas scooters, ATVs, dirt b..
GY6 Blinker Module Flasher, 2 Wire
MIGY50-4065A
A replacement Turn Signal Flasher for Chinese 50cc-250cc Scooters & Go Karts. 2 wires, 3 pin mal..
GN125 Cylinder Assy
MIGN125-5003
Standard (57mm) Barrel Kit, 157FMI, fits Engines of Chinese made SIZUKI EN125, GN125, GS125, etc. Th..
GY6 CDI 45Km Restricted 6Pin
MIGY50-4070E
GY6 CDI 45Km Limited 6Pin, this CDI also supported other brands 45km limited scooters. The CDI cont..





Thank You















WhatsApp
Messenger
Telegram
WeChat
QQ