Air Filter Foam Insert

Brand: Mortch Motor
Product Code: MIGY50-4079-5

Product Viewed: 33

Availability: In Stock

Weight: 0.02kg

0 reviews / Write a review

US$1.00

Shipping To：

More Quotes

🔧 GY6 Air Filter Foam Insert

📦 Compatible With: ZNen Scooter

⚙️ Foam Filter · Air Cleaner Sponge · GY6 Engine

📍 Installation Position: Air Filter Assembly / Engine Intake System

✅ High Efficiency Filtration · Washable & Reusable · OEM Specification · Suitable for GY6 Engine ZNen Scooters

📋 Product Overview

This product is a GY6 engine-specific air filter foam insert, designed for ZNen scooters. This filter is installed inside the air filter assembly to filter dust, sand, and other contaminants from the air entering the engine, protecting internal engine components from wear. Manufactured from high-quality polyurethane foam, it offers excellent filtration efficiency, breathability, and durability. It is washable and reusable, making it economical and environmentally friendly.

Over time, the air filter accumulates dust and debris, leading to reduced filtration efficiency, increased intake resistance, loss of engine power, and increased fuel consumption. Regular cleaning or replacement of the air filter is critical to protecting the engine and extending its service life.

✅ OEM Quality Assurance: Manufactured strictly to GY6 engine original technical standards. Dimensional accuracy and filtration efficiency are fully consistent with original parts, ensuring perfect replacement and reliable filtration performance.

📐 Specifications

🔖 Product Name: Air Filter Foam Insert

🏷️ Engine Type: GY6

🛵 Compatible With: ZNen Scooter

📍 Installation Position: Air Filter Assembly

🧪 Material: Premium Polyurethane Foam

⚙️ Function: Dust Filtration · Engine Protection

✨ Features: Washable & Reusable · Good Airflow

🛵 Compatible Models

ZNen Scooter (with GY6 Engine)

📌 Fitment Note: This foam filter is suitable for ZNen scooters equipped with GY6 engines. If your specific model is not listed, please contact us for compatibility confirmation.

⚙️ Product Features

✅ OEM Specification: Manufactured strictly to GY6 engine original technical standards. Dimensional accuracy matches original parts completely.
🛡️ Premium Foam Material: Made from high-quality polyurethane foam for excellent filtration efficiency and breathability.
🔧 Washable & Reusable: Can be cleaned with mild detergent and water, then air-dried for reuse — economical and environmentally friendly.
💪 Durable: Flexible and durable foam material resists tearing.
🔄 Direct Replacement: Directly replaces dirty or clogged original foam filters.

📖 Installation Guide

Follow these steps to properly install the air filter foam insert. This is a simple DIY procedure that requires no special skills.

🔧 Pre-Installation Preparation

Ensure the vehicle is turned off and cooled down; the engine should be at room temperature.
Prepare a Phillips screwdriver or socket wrench (depending on the air box fastening) and a clean rag.
Choose a clean, dust-free work area to prevent debris from entering the intake system.

🔄 Step 1: Remove the Old Air Filter Foam

Locate the air filter assembly (usually under the scooter seat or behind the side cover).
Release the clips or remove the screws securing the air filter housing, and carefully open it.
Remove the old foam filter, noting its installation orientation and position (alignment marks or shape guides may be present).
Inspect the inside of the filter housing for dust, leaves, or debris, and clean it using a damp cloth or vacuum.
⚠️ Caution: Be careful not to shake dust into the intake duct (the hose leading to the carburetor/throttle body).

🧽 Step 2: Install the New Air Filter Foam

Remove the new foam filter from its packaging and check for any damage or deformation.
Following the same orientation as the old filter, place the new foam into the filter housing.
Ensure the foam sits flush with the housing edges, with no gaps or twisting.
Make sure the sealing edge of the foam aligns with the housing's sealing groove to ensure proper airtightness.
Close the filter housing and secure the clips or screws, ensuring a tight seal.

✅ Step 3: Post-Installation Check

Start the engine and let it idle for a moment; listen for any unusual intake noises or air leaks.
Inspect around the filter housing for any gaps, confirming the cover is properly seated.
It is recommended to record the replacement date and mileage for future maintenance reference.

💡 Maintenance Tips

It is recommended to inspect and clean the foam filter every 2,000-3,000 km.
Use mild detergent and water to clean; gently squeeze to remove dirt. Do not wring or twist forcefully.
Do not use gasoline or strong solvents, as they may damage the foam material.
Air-dry naturally; avoid direct sunlight or high-temperature drying.
After drying, apply a small amount of filter oil (if available) to enhance filtration efficiency.
Replace the filter if it is damaged or severely deformed.

✅ Maintenance Tips:
• Inspect and clean the foam filter every 2,000-3,000 km.
• Use mild detergent and water to clean; gently squeeze to remove dirt.
• Do not use gasoline or strong solvents, as they may damage the foam.
• Air-dry naturally; avoid direct sunlight or high-temperature drying.
• Apply a small amount of filter oil to the foam after drying (if available) to enhance filtration.
• Replace the filter if it is damaged or severely deformed.

⚠️ Important Notice: This product is a GY6 air filter foam insert, suitable for ZNen scooters. Minor variations may exist between production batches. If your specific model is not listed, please contact us for compatibility verification. Images are for reference only; actual product may vary.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.