SEGWAY Oil Filter

🔧 SEGWAY Oil Filter

📦 Part Number: F01G00500001

🛢️ OEM Specification Oil Filter · High Efficiency Filtration

📍 Type: Spin-on Full-flow Oil Filter

✅ High-grade Filter Media · Anti-Drain Back Valve · Fits Multiple ATV/UTV Models

This product is an OEM-spec oil filter for SEGWAY vehicles, part number F01G00500001. It features high-precision multi-layer composite filter media that effectively captures metal particles, carbon deposits, and oxidized sludge generated during engine operation, ensuring clean oil is supplied to all critical lubrication points. The built-in bypass valve and anti-drain back valve allow rapid oil pressure buildup during cold starts, reducing dry friction. Regularly replacing the oil filter is one of the most essential maintenance procedures to extend engine life and maintain peak performance.

• ✅ OEM Specification: Threads, gasket dimensions, can diameter, and height fully comply with SEGWAY original standards for a perfect replacement.
• 📄 High-Efficiency Composite Media: Uses imported high-dirt-holding capacity filter paper with 20~30 micron filtration rating, significantly reducing engine wear.
• 🔄 Anti-Drain Back Valve: Prevents oil from draining back into the crankcase when the engine is off, ensuring rapid oil pressure buildup on startup and reducing dry-start wear.
• ⚡ Bypass Valve Protection: Automatically opens if the filter becomes clogged or during cold starts with thick oil, guaranteeing uninterrupted oil flow to protect the engine.
• 🔧 High-Strength Shell: Corrosion-resistant and pressure-resistant metal canister withstands high oil pressure without deformation or leakage.
• 🛡️ Age-Resistant Gasket: Nitrile rubber seal resists oil and heat, providing long-lasting leak-free performance without hardening.

✅ When to Replace Your Oil Filter:
• Scheduled maintenance interval reached (every 2000~3000 km or 6 months);
• Oil pressure warning light flashes or low oil pressure is observed;
• Always replace the oil filter whenever engine oil is changed;
• Visible rust, dents, or oil seepage on the filter housing.
Neglecting oil filter replacement can lead to filter clogging, forcing the bypass valve to stay open and allowing unfiltered oil to circulate, accelerating wear on crankshaft bearings, journals, and piston rings.

⚠️ Installation Tips:
1. Apply a thin film of clean engine oil to the rubber gasket before installation to ensure a proper seal and prevent dry friction.
2. Screw the filter onto the mounting base by hand until the gasket contacts the base, then tighten an additional 3/4 to 1 turn with a wrench (do not overtighten, as this may damage the threads or gasket).
3. After installation, fill with new engine oil, start the engine and let it idle for 1~2 minutes, then inspect for any leaks around the filter base.
4. Always replace the engine oil simultaneously with the oil filter (refer to your vehicle's service manual for oil capacity).
5. Used oil and filters are hazardous waste. Please dispose of them at an authorized collection center; do not discard carelessly.

⚠️ Important Notice: This oil filter is a high-quality aftermarket replacement part. It is not SEGWAY branded or packaged, but is manufactured strictly to original equipment specifications. Minor differences in can printing or packaging may occur between production batches and do not affect fitment or performance. Images are for reference only; actual product may vary. For best compatibility, please verify the part number or thread size on your original oil filter before purchasing. If you have any questions, contact customer service with your VIN for confirmation.

🔹 Service Tip: Under severe conditions (dusty, high temperature, heavy load), it is recommended to shorten the oil and filter change interval to 1500 km to maintain optimal engine protection 🔹