2WD/4WD Switch Assy
- Brand: Mortch Motor
- Product Code: MICF9DQV-169080-1102
- Product Viewed: 17
- Availability: In Stock
- Weight: 0.50kg
US$50.01
| Shipping To： |
🔧 CFMoto 2WD/4WD Switch Assembly
📦 Part Number: 9DQ8-169080-1102 / 9DQV-169080-1102
⚙️ 2WD/4WD Switch Assy · Drive Mode Switch · OEM Spec
📍 Installation Location: Dashboard / Control panel (drive mode selection position)
✅ Single unit · Premium waterproof switch · Direct fit · Compatible with multiple CFMoto ATV models
This is a CFMoto OEM-spec 2WD/4WD Switch Assembly, part number 9DQ8-169080-1102 / 9DQV-169080-1102, sold as a single unit. This switch assembly is the core control component of the vehicle's drive mode system, installed on the dashboard or control panel. It is used to switch between 2WD (two-wheel drive) and 4WD (four-wheel drive) modes to adapt to different driving conditions — a critical control element for the 4WD system.
Over time, the original switch assembly may fail due to contact wear, spring fatigue, moisture ingress, or physical damage — resulting in unresponsive operation, intermittent contact, or complete failure. Replacing with an OEM-spec 2WD/4WD switch assembly is an essential repair to restore drive mode switching function and ensure off-road capability.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Dimensions, connector type, and electrical specifications are identical to the genuine part, ensuring a perfect replacement and reliable control performance.
🔁 Supersession: This part replaces OEM number 9DQV-169080-1100. The current version is 9DQV-169080-1102.
This 2WD/4WD Switch Assembly (part number 9DQ8-169080-1102 / 9DQV-169080-1102, single unit) fits the following CFMoto ATV models:
- 2026 CF400ATR-7L · CForce C4 Touring T3b
- 2026 CF500ATR-15L · GOES TERROX 550L T3b
- 2026 CF500ATR-17L · GOES TERROX 500L EPS T3b
📌 Fitment Note: This 2WD/4WD switch assembly fits the drive mode control position of the listed CFMoto ATV models. Sold as a single unit. If your specific model is not listed, please contact us with your VIN to confirm compatibility. 9DQ8-169080-1102 and 9DQV-169080-1102 are different number variants of the same product — fully interchangeable.
🔁 Supersession: This part replaces 9DQV-169080-1100. Please verify your original part number before ordering.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; dimensions, connector, and electrical specs match the genuine part exactly.
- 🛡️ Waterproof & Dustproof Design: Excellent sealing for reliable performance in harsh outdoor conditions.
- 🔧 Direct Fitment: Direct replacement for the original part — no modifications required.
- 💪 Reliable Contacts: Premium copper alloy contacts provide excellent conductivity and long service life.
- 🔄 Direct Replacement: Replaces unresponsive, intermittent, or damaged original switch assemblies.
- 🔁 Updated Part Number: This part replaces 9DQV-169080-1100. Both new and old numbers are valid for ordering.
• Drive mode does not switch or responds intermittently when the switch is pressed.
• Switch feels sticky or does not stay in the operated position.
• Visible damage, cracks, or moisture ingress on the switch.
• Drive mode indicator on the dashboard is abnormal or does not illuminate.
• Burnt contacts causing high resistance, overheating, or smoking.
If any of these occur, replace the switch assembly promptly to ensure proper drive mode switching function.
1. Confirm the switch is the correct 9DQ8-169080-1102 or 9DQV-169080-1102 matching the original.
2. Disconnect the battery negative terminal to prevent short circuits.
3. Remove the old switch from the dashboard or control panel, noting the wiring connection.
4. Clean the mounting hole and inspect the wiring harness connector for damage or corrosion.
5. Install the new switch in the correct orientation and connect the wiring harness.
6. Reconnect the battery and test both 2WD and 4WD switching functions.
Installation is DIY-friendly, but always observe electrical safety precautions.
🔁 This part replaces 9DQV-169080-1100. Both new and old numbers are valid for ordering.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our 2WD/4WD Switch Assy