High-Pressure Fuel Hose Assy 1

🔧 CFMoto High-Pressure Fuel Hose Assy 1

📦 Part Number: 5BWV-120210-5000

⚙️ High-Pressure Fuel Hose Assy 1 · Fuel Supply Hose · OEM Spec

📍 Installation Location: Fuel system / Between fuel pump and fuel rail

✅ Single unit · High-pressure fuel hose · Direct fit · Compatible with multiple CFMoto SSV ZForce 800/950 models

This is a CFMoto OEM-spec High-Pressure Fuel Hose Assy 1, part number 5BWV-120210-5000, sold as a single unit. This fuel hose connects the fuel pump to the fuel rail (fuel distribution pipe) in the fuel system, delivering pressurized fuel to the injectors — a critical component for ensuring a stable and sufficient fuel supply to the engine.

Over time, the original high-pressure fuel hose may develop cracks, leaks at the connectors, or bulging due to rubber aging, high temperatures, fuel corrosion, or external damage. In severe cases, fuel leakage can pose a fire hazard. Replacing with an OEM-spec fuel hose is an essential maintenance practice to ensure fuel system safety and proper engine operation.

• ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; diameter, length, connector type, and pressure rating match the genuine part exactly.
• 🛡️ High-Pressure Fuel-Resistant Material: Made from premium fuel-resistant rubber capable of withstanding fuel system pressure, fuel corrosion, and high-temperature aging.
• 🔧 Direct Fitment: Connectors match the original perfectly — easy drop-in replacement.
• 🔄 Direct Replacement: Replaces aged, leaking, or damaged original high-pressure fuel hoses.

✅ Typical signs you need to replace the High-Pressure Fuel Hose:
• Visible cracks, aging cracks, or bulging on the hose surface (visual inspection).
• Fuel residue or wetness at the hose connectors — signs of leakage.
• Engine hard starting, poor acceleration, or fuel supply issues.
• Fuel system pressure test fails.
• Hose has reached the recommended replacement interval (typically 5–8 years or per maintenance schedule).
⚠️ Fuel leaks can cause fire — replace immediately if any of these signs appear.

✅ Installation Tips:
1. Confirm the hose is the correct 5BWV-120210-5000 matching the original.
2. ⚠️ Safety Warning: Relieve fuel system pressure before disconnecting (remove fuel pump fuse and run engine until it stalls).
3. Disconnect the battery negative terminal to prevent sparks.
4. When removing the old hose, have a container ready to catch residual fuel.
5. Clean the connector ports and inspect the fuel rail and fuel pump ports for damage.
6. Install the new hose, ensuring both connectors click into place and are securely locked.
7. Reconnect the battery, turn the ignition on (without starting) to pressurize the fuel system, and check for leaks.
8. Start the engine and recheck all connectors for fuel leakage.
🚨 Fuel system work involves safety risks — professional installation is strongly recommended.

⚠️ Important Note: This product is a CFMoto High-Pressure Fuel Hose Assy 1, part number 5BWV-120210-5000, sold as a single unit. Fits the listed CFMoto SSV models. Slight variations may occur between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may vary. Fuel system repairs involve safety risks — always follow proper procedures and check for leaks after installation.