Gasket 9.2x19.2x1.2

🔧 CFMoto Water Pump Wear Washer

📦 Part Number: 0GRV-081006-5000

⚙️ Water Pump Wear Washer · 9.2×19.2×1.2mm · OEM Spec

📍 Installation: Between retaining ring and driven gear in pump shaft bore

✅ Single unit · Premium wear-resistant material · Size 9.2×19.2×1.2mm · Fits multiple CFMoto ATV models

This is a CFMoto OEM-spec water pump wear washer, part number 0GRV-081006-5000, sold as a single unit. This washer measures 9.2×19.2×1.2mm and is installed in the pump shaft bore, positioned between the retaining ring (circlip) and the driven gear. It reduces friction and wear between the gear and shaft bore, while also providing axial limiting and cushioning functions — an important component for the durability and reliability of the water pump drive system.

This wear washer operates in a high-temperature, high-speed oil environment and may become worn, thinned, deformed, or damaged over time — resulting in increased axial clearance of the driven gear, abnormal meshing, or operating noise. Replacing it promptly with an OEM-spec washer is essential to restore pump drive precision and ensure proper cooling system operation.

• ✅ OEM Specification: Manufactured to CFMoto's original technical standards. The 9.2×19.2×1.2mm dimensions are identical to genuine parts.
• 🛡️ Premium Wear-Resistant Material: Made from high-strength, wear-resistant, corrosion-resistant material for long-term reliability.
• 🔧 Precision Machining: Precision-machined thickness and flatness for perfect fitment with the retaining ring and driven gear.
• 💪 Reliable Wear Reduction: Effectively reduces friction and wear between the driven gear and shaft bore, extending pump service life.
• 🔄 Direct Replacement: Can be used to directly replace worn or damaged original water pump wear washers.

✅ Typical signs that the water pump wear washer needs replacement:
• Increased axial play of the driven gear.
• Unusual noise or vibration from the water pump during operation.
• Inspection reveals severe wear, thinning, deformation, or corrosion of the washer.
• Driven gear to shaft bore fit is loose with unstable rotation.
• Visible wear marks between the retaining ring and gear.
If any of these signs appear, please inspect and replace the water pump wear washer promptly.

✅ Installation Tips:
1. Confirm the washer part number is 0GRV-081006-5000 with size 9.2×19.2×1.2mm and matches your vehicle.
2. Remove the water pump assembly, then remove the retaining ring (circlip) and driven gear.
3. Extract the old washer and clean the mounting area, removing oil and debris.
4. Inspect the retaining ring and driven gear contact surfaces for wear or damage.
5. Install the new washer in the shaft bore, between the retaining ring and driven gear.
6. Reinstall the driven gear and retaining ring, ensuring the circlip is fully seated.
7. Reassemble the pump and install it on the engine.
Professional installation is recommended. Pay attention to the assembly order of washer, retaining ring, and gear.

⚠️ Important Notice: This product is a CFMoto water pump wear washer, part number 0GRV-081006-5000, size 9.2×19.2×1.2mm, single unit. Installed between the retaining ring and driven gear in the pump shaft bore. Fits the listed CFMoto ATV models. Minor variations may exist between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may differ slightly.