CFMoto CF650 Oxygen Sensor F00HL00193

CF650 Oxygen Sensor

OEM Part Number: 0060-176000

🔌 Emissions System · Air-Fuel Ratio Control

Fits CFMoto 650 283MT engine and various other CFMoto engines

This is a CFMoto OEM-spec oxygen sensor, designed for the CF650 283MT 4-stroke liquid-cooled engine and various other CFMoto engines. The oxygen sensor is mounted in the exhaust stream to measure the amount of oxygen in the exhaust and send the signal to the ECU. Based on this signal, the ECU adjusts the fuel injector output to optimize the air-fuel ratio, reducing unburnt fuel and nitrogen oxide emissions while improving engine performance and fuel economy.

CFMoto 650 listed part number: 0060-176000

This oxygen sensor (0060-176000) fits the following CFMoto models and engines:

• Precise Oxygen Measurement: High-quality sensing element accurately measures exhaust oxygen concentration, providing accurate feedback signals.
• Optimizes Air-Fuel Ratio: Helps the ECU precisely control fuel injection, keeping the engine at optimal air-fuel ratio for improved power and fuel economy.
• Reduces Emissions: Effectively reduces unburnt hydrocarbons and nitrogen oxide emissions, meeting environmental standards.
• High-Temperature Resistant: Designed for long-term stable operation in high-temperature exhaust environments.
• Direct Replacement: Manufactured to original specifications, plug-and-play installation without modifications.
• Broad Compatibility: Fits various CFMoto engines and models, covering displacements from 125cc to 650cc.

🔧 Oxygen Sensor Function & Failure Symptoms

The oxygen sensor is a critical component in the engine's closed-loop control system. When it fails, the ECU cannot accurately determine exhaust oxygen content, leading to improper air-fuel ratio. Symptoms include: check engine light illumination, unstable idle, increased fuel consumption, power loss, and excessive emissions. Regular inspection and timely replacement of aged or damaged oxygen sensors is essential for maintaining engine performance and emissions compliance.

✅ Installation Tip: Clean the threads before installation and apply a small amount of anti-seize compound. Use a dedicated oxygen sensor socket to tighten to the specified torque, avoiding over-tightening which may damage the sensor. After installation, start the engine and check if the check engine light turns off; use a diagnostic tool to confirm proper sensor operation. Inspect related wiring connections as well.

⚠️ Important Notice: This product is a CFMoto oxygen sensor, part number 0060-176000. While widely compatible with various CFMoto models, connector types may vary between different models. We recommend confirming your original sensor connector shape or providing your original part number for verification before purchase.