Oil Strainer Assy
- Brand: Mortch Motor
- Product Code: MICF0NYV-070200-1000
- Product Viewed: 788
- Availability: In Stock
- Weight: 0.30kg
US$9.07
| Shipping To： |
CFMoto Oil Filter Assembly
OEM Part Number 0NYV-070200-1000
🔧 Oil Filter Assembly · Lubrication System
OEM quality · Direct replacement · Ensures clean engine oil
This is a genuine CFMoto Oil Filter Assembly, part number 0NYV-070200-1000. This filter is a critical component of the engine lubrication system, responsible for removing metal particles, carbon deposits, and contaminants from the engine oil. It maintains oil cleanliness, reduces wear on internal moving parts, and extends engine service life. Direct replacement of the original oil filter is an essential step during every oil change. Compatible with various CFMoto SSV, UTV, and ATV models equipped with 380Y-2A, 380Y-3, 192Q, and 192R engines.
✨ Product Type: Oil Filter Assembly
✨ System: Engine Lubrication System
✨ Recommended Replacement: Replace with every oil change
This Oil Filter Assembly (0NYV-070200-1000) fits the following CFMoto models:
- SSV CF1000SU Z10 380Y-2A
- SSV CF1000SU-L Z10-4 380Y-2A
- SSV CF1000SZ Z10 380Y-2A (incl. AU specs)
- SSV CF1000SZ-L Z10-4 380Y-2A
- UTV CF1000UTR-8 UForce 1000 PRO(T1b) (incl. GD specs)
- UTV CF1000UTR-8K UForce 1000 PRO MAX(T1b) (incl. GD/HLG specs)
- UTV CF1000UTR-8L UForce 1000 PRO MAX(T1b)
- UTV CF1000UU-8 UForce 1000 XL
- UTV CF1000UU-8(AU/ST) UForce 1000 PRO
- UTV CF1000UU-8K UForce 1000 Pro Highland (incl. AU/RU/ST specs)
- UTV CF1000UU-8L U10 XL PRO (incl. AU/ST specs)
- UTV CF1000UU-8LK U10 XL PRO HIGHLAND (incl. AU/RU/ST specs)
- UTV CF1000UZ-8 UForce U10 PRO (incl. CA/US specs)
- UTV CF1000UZ-8K UForce U10 PRO Highland (incl. CA/US specs)
- UTV CF1000UZ-8L UForce U10 PRO XL (incl. CA/US specs)
- UTV CF1000UZ-8LK UForce U10 PRO XL Highland (incl. CA/US specs)
- ATV CF400ATR-7L CForce C4 Touring T3b (192Q)
- ATV CF500ATR-17L GOES TERROX 500L EPS T3b (192R)
- ATV CF500ATR-15L GOES TERROX 550L T3b (192R)
📌 Important Note: This part is an Oil Filter Assembly, part number 0NYV-070200-1000. The list above represents the full compatibility data based on OEM information, grouped by engine type. It is recommended to replace the oil filter with every oil change for optimal engine protection. If your model is not listed, please verify your original part number or engine model, or contact our support team to confirm compatibility.
- OEM OE Quality: Manufactured strictly to original specifications, ensuring filtration efficiency, bypass valve pressure, and mounting dimensions identical to the original part.
- High Filtration Efficiency: Made from high-quality filter media that effectively removes harmful contaminants from engine oil.
- High Dirt Holding Capacity: High-density pleated filter media provides excellent dirt holding capacity for extended service life.
- Pressure Resistant: Withstands lubrication system operating pressure without deformation.
- Anti-Drainback Valve: Built-in anti-drainback valve prevents oil from draining back after engine shutdown, ensuring rapid oil pressure buildup at startup.
- Direct Replacement: Plug-and-play installation in the original location, no modifications required.
🛑 Importance of the Oil Filter
The oil filter is a critical component of the engine lubrication system. It removes metal particles, carbon deposits, and contaminants from the engine oil, maintaining oil cleanliness. A clogged or dirty oil filter can restrict oil flow, reduce filtration efficiency, and allow contaminants to circulate through the engine, accelerating wear on pistons, rings, cylinder walls, and bearings. In severe cases, this can lead to catastrophic engine failure. Replacing the oil filter with every oil change using genuine-quality filters is essential maintenance to ensure your CFMoto engine receives optimal lubrication protection and extends engine life.
Follow these steps to replace the external oil filter assembly. It is recommended to perform this operation during every oil change.
🔧 Preparation
- Ensure the engine is turned off and cooled to room temperature (to avoid burns).
- Prepare tools: oil filter wrench (or strap wrench), drain pan, funnel, new engine oil, and clean rags.
- Place the vehicle on level ground and engage the parking brake.
- Wear protective gloves to avoid contact with hot oil and chemicals.
🔄 Step 1: Drain the Old Oil
- Locate the oil drain plug at the bottom of the engine and place the drain pan underneath.
- Using the appropriate wrench, remove the drain plug and allow the old oil to fully drain into the pan.
- After the oil has stopped dripping, clean the drain plug and sealing washer, then reinstall and tighten to the specified torque.
🧽 Step 2: Remove the Old Oil Filter Assembly
- Locate the external oil filter (usually on the side of the engine or near the frame).
- Using an oil filter wrench, turn the old filter counterclockwise to remove it.
- Carefully tilt the filter to avoid spilling residual oil, and place it into the drain pan.
- Clean the filter mounting surface to ensure no old gasket material or debris remains.
✅ Step 3: Install the New Oil Filter Assembly
- Remove the new oil filter assembly (0NYV-070200-1000) from its packaging.
- Apply a thin coat of new engine oil to the gasket of the new filter to ensure a proper seal and ease future removal.
- Position the new filter vertically against the mounting surface and turn it clockwise by hand until the gasket contacts the mounting surface.
- Then, tighten the filter an additional 3/4 to 1 turn using the filter wrench (do not overtighten to avoid damaging the gasket).
🛢️ Step 4: Add New Engine Oil
- Using a funnel, pour the recommended amount and grade of new oil into the oil fill port (refer to the owner's manual).
- Start the engine and let it idle for approximately 1–2 minutes, checking that the oil pressure warning light turns off.
- Turn off the engine and wait a few minutes for the oil to settle back into the oil pan.
- Check the oil dipstick to ensure the oil level is between the minimum and maximum marks, adding oil if necessary.
- Inspect the filter and drain plug for any signs of leakage.
💡 Maintenance Tips
- It is recommended to replace the oil and oil filter according to the maintenance schedule in the owner's manual (typically every 3,000–5,000 km or every 6 months).
- Under severe driving conditions (e.g., dusty environments, short trips, heavy loads), shorten the replacement interval.
- Always use an original-quality oil filter to ensure filtration performance and sealing integrity.
- If the oil pressure warning light illuminates or abnormal engine noises occur, immediately inspect the oil filter and lubrication system.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Oil Strainer Assy
Related Products
Nut M34*1.5*15 LH
MICF0NYV-060003-3000
CFMoto Nut M34×1.5×15 LH (Left Hand) Part Number: 0NYV-060003-3000 🔧 Lock Nut · Left-Hand Thre..