JOG 50cc Racing AC CDI

Brand: Mortch Motor
Product Code: MIHPCDI-JOG50B

Product Viewed: 215

Availability: In Stock

Weight: 0.18kg

Packing Size: 10.00 x 8.00 x 4.00cm

0 reviews / Write a review

US$4.00 595 SOLD

Shipping To：

More Quotes

JOG50 Racing AC CDI Ignition

⚡ No Rev Limit · High Performance CDI · 5-Pin Connector

For Minarelli 1PE40QMB 50cc 2-stroke engines · Plug and play performance upgrade

📋 Product Overview

This is a high-performance "no rev limit" racing AC CDI ignition module designed for JOG scooter engines, specifically for air-cooled Minarelli 1PE40QMB 50cc 2-stroke engines. These are among the most common JOG scooter engines today and are produced by many manufacturers.

With a simple plug-and-play replacement of your original CDI, you can significantly increase acceleration and performance. Acceleration, particularly on hills and steep inclines, will be greatly improved. This unit removes the factory rev limit, allowing your engine to reach its full potential.

✨ Key Benefits: No rev limit · Plug and play · Improved acceleration · Better hill climbing

📐 Specifications

Length

2.89"

≈ 73.4 mm

Width

1.45"

≈ 36.8 mm

Thickness

1.17"

≈ 29.7 mm

Connector Type

5-Pin (3 single pins + 2-pin female plug)

Ignition Type

AC Ignition

Engine Application

Minarelli 1PE40QMB 50cc 2T

🏍️ Compatible Models

This CDI ignition unit fits the following vehicles:

🏍️ Engine Type

Minarelli 1PE40QMB 50cc air-cooled 2-stroke engines
JOG style engines (commonly found on Chinese scooters, pit bikes, go karts, dirt bikes, and ATVs)

🏍️ Vehicle Types

JOG series scooters
Chinese 50cc 2-stroke scooters
Pit bikes
Go karts
ATVs (All-Terrain Vehicles)
Other vehicles using Minarelli 1PE40QMB engines

📌 Compatibility Note: Compatibility is based on matching wiring and connectors. Please ensure your make and model have the same 5-pin connector configuration (3 single pins + 2-pin female plug) prior to ordering.

⚡ Performance Benefits

🚀 No Rev Limit

Factory CDIs often cut ignition at a specific RPM. This racing CDI removes this limitation, allowing the engine to reach higher RPMs and unleash its full potential.

🏔️ Improved Hill Climbing

Optimized ignition curve delivers stronger torque output on hills and steep inclines for easier climbing.

⚡ Faster Acceleration

Plug-and-play installation provides noticeable acceleration improvement, especially in the mid-range.

📈 Higher Top Speed

Removing the RPM limit allows the engine to exceed factory-set maximum RPMs for higher top speed.

💡 Upgrade Tip: For best results, consider pairing with performance exhaust and high-flow air filter. Note that removing the RPM limit allows higher engine speeds – use high-quality 2-stroke oil.

🔌 Connector Information

5-Pin Connector Configuration

This CDI features a 5-pin connector design: 3 single pins + 1 two-pin female plug. This is the standard configuration for JOG style engines.

Please verify your vehicle uses the same connector configuration before ordering.

✨ Product Features

No Rev Limit: Removes factory RPM limitation to unleash engine potential.
High-Performance Ignition Curve: Optimized ignition advance for improved performance across all RPM ranges.
Plug and Play: Direct replacement for original CDI, no additional modifications needed.
AC Ignition: Designed for JOG style AC ignition systems.
5-Pin Connector: Standard interface for perfect JOG engine harness compatibility.
Improved Acceleration: Particularly noticeable on hills and steep inclines.
Wide Compatibility: Fits Chinese scooters, pit bikes, go karts, ATVs, and more.

🔧 Installation Tip

1. Disconnect the negative battery terminal before installation to prevent shorts.
2. Locate the original CDI unit, disconnect the connector, and remove the old CDI.
3. Install the new CDI, ensuring all pins are correctly inserted (3 single pins + 2-pin female plug).
4. Ensure all connectors are fully seated for good contact.
5. Reconnect the battery and test starting and idle operation.
6. Take a test ride to experience the performance improvement; familiarize yourself with the vehicle's new characteristics.

⚠️ Important Notice: This is a JOG50 Racing AC CDI ignition module for Minarelli 1PE40QMB 50cc air-cooled 2-stroke engines. Features a 5-pin connector configuration (3 single pins + 2-pin female plug). Before purchasing, please verify your vehicle uses the same connector configuration. Removing the rev limit allows higher engine speeds – ensure your engine is in good condition. Images are for reference only. The actual product may vary.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.