Air Temperature Sensor
- Brand: Mortch Motor
- Product Code: MICF0060-111200
- Product Viewed: 9
- Availability: Pre-Order Pre-Order
- Weight: 0.03kg
US$5.20 1 SOLD
| Shipping To： |
🔧 CFMoto Air Temperature Sensor
📦 Part Number: 0060-111200
⚙️ Intake Air Temperature Sensor · IAT Sensor · OEM Specification
📍 Installation Position: Intake System / After Air Filter / Intake Manifold
✅ Precision Sensing · Fast Response · Stable Signal · Suitable for CFMoto 283MT Engine
This product is a CFMoto OEM specification air temperature sensor (Intake Air Temperature sensor, IAT sensor), part number 0060-111200. This sensor is installed in the engine intake system to monitor the temperature of the air entering the engine in real time, converting the temperature signal into an electrical signal transmitted to the ECU (Engine Control Unit). The ECU uses the intake air temperature signal to adjust fuel injection quantity and ignition timing, optimizing combustion efficiency and power output under different temperature conditions.
Over time, the air temperature sensor may experience sensing element aging, signal drift, or complete failure, causing the ECU to receive incorrect temperature data. This can result in rich or lean fuel mixture, unstable idle, increased fuel consumption, power loss, or starting difficulties. Timely replacement of a failed sensor is critical to ensuring proper engine operation and fuel economy.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Resistance-temperature characteristics, response time, and mounting dimensions are fully consistent with original parts, ensuring perfect replacement and accurate temperature signal output.
This air temperature sensor (Part Number 0060-111200) is compatible with the following CFMoto engines:
- 283MT (2010-2015)
📌 Fitment Note: This air temperature sensor is suitable for the CFMoto engine models listed above. If your specific model is not listed, please contact us with your engine model or VIN for compatibility confirmation.
- ✅ OEM Original Specification: Manufactured strictly to CFMoto original technical standards. Resistance-temperature characteristics match original parts completely.
- 🛡️ Precision Thermistor: High-quality thermistor for fast temperature response and accurate measurement.
- 🔧 Stable and Reliable: Good sealing with oil, heat, and vibration resistance.
- 💪 OEM Connector: Standard OEM connector for plug-and-play installation, no wiring modification required.
- 🔄 Direct Replacement: Directly replaces signal-drifting, failed, or damaged original sensors.
• Check engine light illuminated with intake air temperature sensor related fault codes.
• Unstable idle, hesitation during acceleration, or loss of power.
• Noticeably increased fuel consumption.
• Difficulty starting when cold or hot.
• Multimeter measurements show sensor resistance values out of specification.
If you experience any of these symptoms, please inspect and replace the sensor promptly.
1. Disconnect the negative battery cable before replacement to ensure safety.
2. Unplug the electrical connector and remove the old sensor.
3. Clean the sensor mounting hole, ensuring no debris.
4. When installing the new sensor, tighten to OEM torque specifications to avoid thread damage.
5. Connect the electrical connector, ensuring it is fully seated and locked.
6. Reconnect the battery, start the engine, and verify the check engine light turns off.
Professional installation by a qualified technician is recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Air Temperature Sensor