RH Handlebar Switch

Brand: Mortch Motor
Product Code: MICF7020-160700-00002

Product Viewed: 445

Availability: In Stock

Weight: 0.41kg

0 reviews / Write a review

US$26.79 42 SOLD

Shipping To：

More Quotes

CF Moto RH Handlebar Switch Assembly

New Part Number: 7020-160700-00002

Old Part Number: 9010-160700 (Superseded)

Product Type: Electrical System | Handlebar Switch

Connector Configuration: 3-pin (4-hole female) + 6-pin (6-hole female)

OEM specification right handlebar switch assembly for controlling fuel system and 4WD functions on your vehicle. New part number 7020-160700-00002 is the factory upgrade model, fully replacing old part number 9010-160700. Manufactured with high-quality materials to ensure reliable electrical contact and long service life.

📋 Product Overview

This product is an OEM-quality right handlebar switch assembly for CF Moto vehicles, with new part number 7020-160700-00002, fully superseding the old part number 9010-160700. The right handlebar switch is an important component of the vehicle's electrical control system, specifically handling the fuel system operation and four-wheel drive (4WD) engagement controls.

This unit features a modular design with two connectors: a 3-pin (actually 4-hole) connector and a 6-pin connector, ensuring precise matching with the original wiring harness. The switch contacts use high-quality conductive materials with excellent conductivity and durability, capable of withstanding frequent operation and ensuring reliable response of fuel and 4WD functions.

🔧 OEM Quality Assurance: Manufactured strictly according to CF Moto original technical standards. The new part number 7020-160700-00002 is the factory upgrade model, fully compatible with the old part number 9010-160700 for direct replacement. Material, electrical parameters, and weather resistance are consistent with original parts.

📐 Specifications

New Part #:

7020-160700-00002

Old Part #:

9010-160700

Product Name:

RH Handlebar Switch

Connector 1:

3-pin (4-hole female)

Connector 2:

6-pin (6-hole female)

Position:

Right Handlebar

🔧 Applicable Models List

This RH handlebar switch assembly (7020-160700-00002 / 9010-160700) fits the following CF Moto models:

🏍️ CForce Series

• ATV CF400AU CForce 400S/450S

• ATV CF400AU-L CForce 400L/450L

• ATV CF500ATR CForce 520

• ATV CF500ATR-A CForce 550

• ATV CF500AU-6L CForce 550

🏍️ X5 Series

• ATV CF500 X5

• ATV CF500-2 X5

• ATV CF500-2A X5

• ATV CF500-5 X5

• ATV CF500-5A X5

• ATV CF500-5B X5

• ATV CF500-5C X5

• ATV CF500-A X5

• ATV CF500-D X5

• ATV CF500-E X5

🏍️ X6 Series

• ATV CF600-B X6

• ATV CF600-C X6

• ATV CF625-2 X6

• ATV CF625-2A X6

• ATV CF625-B X6

• ATV CF625-C X6

🏍️ X8 Series

• ATV CF800-2 X8

📌 Application Note: This RH handlebar switch assembly (7020-160700-00002 / 9010-160700) fits the CF Moto models listed above. New part number 7020-160700-00002 fully replaces old part number 9010-160700. If your specific model is not listed, please contact our customer service with your Vehicle Identification Number (VIN) for confirmation.

⚙️ Product Functions (Fuel & 4WD)

Fuel System Control: Manages fuel pump priming and fuel delivery system operation.
4WD Engagement: Controls engagement and disengagement of four-wheel drive system.
OEM Connectors: 3-pin + 6-pin connector configuration for plug-and-play installation.

Note: This switch assembly specifically handles fuel system and 4WD functions. Other auxiliary functions may vary by vehicle model.

✅ Signs of Failure (Fuel/4WD): RH handlebar switch failure affecting fuel or 4WD may manifest as:
• Fuel pump not priming when key is turned.
• Engine starts but immediately dies (fuel delivery interrupted).
• 4WD indicator light not responding to switch.
• 4WD system fails to engage or disengage.
• Intermittent fuel system or 4WD operation.
If you encounter these issues, inspect and replace the RH handlebar switch assembly promptly.

✅ Installation Tips: Disconnect the negative battery terminal before installation. When removing the old switch, note the wiring routing. Install the new switch on the right handlebar, ensuring proper positioning without interfering with throttle operation. Connect both connectors (3-pin and 6-pin), ensuring they are fully inserted and latched. Test fuel system and 4WD functions after installation.

⚠️ Important Notice: This product is a CF Moto RH handlebar switch assembly, new part number 7020-160700-00002, fully replacing old part number 9010-160700. It is applicable for the CF Moto models listed above. Minor variations may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with your Vehicle Identification Number (VIN) to verify compatibility. Images are for reference only; the actual product may differ slightly due to batch variations.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.