YP100 Intake Manifold Insulator

Brand: Mortch Motor
Product Code: MIYP100-5090B

Product Viewed: 640

Availability: Pre-Order🔔

Weight: 0.01kg

Packing Size: 7.00 x 4.00 x 0.50cm

0 reviews / Write a review

US$0.32

Shipping To：

More Quotes

🔧 Yamaha 100 Intake Manifold Gasket

📦 Part Number: MIYP100-5090B

🔩 Intake Manifold Insulator · JOG 100cc LY149QMG

📍 Installation Position: Between Intake Manifold and Cylinder Head

✅ High-Temp Material · Precision Seal · Direct Replacement · Prevents Air Leaks

📋 Product Overview

This product is a Yamaha 100 Intake Manifold Gasket (Intake Manifold Insulator), part number MIYP100-5090B. It is designed for JOG 100cc LY149QMG and similar engines, installed between the intake manifold and the cylinder head to provide sealing and thermal insulation.

This gasket sits between the head and the manifold. Like the manifold, these gaskets will crack over time and leak air, causing the engine to run poorly. We suggest you replace these whenever you change the manifold to avoid problems later. Keep these in stock!

✅ Quality Assurance: Manufactured from high-temperature and oil-resistant materials, precisely matched to OEM dimensions for long-lasting sealing performance.

📐 Specifications

🔖 Part Number: MIYP100-5090B

🏷️ Product Name: Intake Manifold Gasket / Insulator

🔧 Compatible Engine: JOG 100cc LY149QMG

📏 Mounting Holes: 50mm (center to center)

⭕ Diameter: 20mm

📍 Installation: Between Intake Manifold & Cylinder Head

🔧 Mechanic's Note

Why should you pay attention to the intake gasket?

This gasket sits between the cylinder head and the intake manifold, subjected to high heat and vibration.
Like the manifold itself, these gaskets will harden, crack, and deteriorate over time, causing air leaks.
Air leaks lead to rough idle, poor acceleration, increased fuel consumption, and even starting issues.
Recommendation: Always replace this gasket whenever you change the intake manifold to avoid future problems.
Keep these in stock for quick repairs!

🏍️ Compatible Models & Engines

This intake manifold gasket (MIYP100-5090B) is compatible with the following models and engines:

Yamaha JOG 100cc · 4-Stroke (LY149QMG)
Yamaha RS100 · 4-Stroke
Linhai LY149QMG Engine
Other scooters equipped with 100cc LY149QMG series engines

📌 Fitment Note: This gasket is specifically designed for the LY149QMG intake system. Please verify that your original gasket has 50mm mounting holes and 20mm inner diameter before purchase. If your model is not listed, please contact us for compatibility confirmation.

⚙️ Product Features

🔩 Precision Dimensions: 50mm mounting hole spacing and 20mm inner diameter for a perfect match to OEM intake manifolds and cylinder heads.
🔥 High-Temperature Material: Constructed from quality oil-resistant and heat-resistant materials, maintaining reliable sealing in high-temperature engine environments.
🛡️ Reliable Sealing: Effectively prevents intake air leaks, maintains proper air-fuel ratio, and ensures consistent engine performance.
🔄 Direct Replacement: Fully compatible with the original factory gasket — simple installation with no modifications needed.
📦 Service Essential: The ideal companion part when replacing the intake manifold, saving you from a second disassembly.

✅ Typical signs that the intake manifold gasket needs replacement:
• Engine idles roughly or stalls frequently.
• Sluggish acceleration and noticeable power loss.
• Increased fuel consumption.
• Oil residue or hissing sound near the intake manifold.
• Visible cracks, deformation, or hardening of the gasket.
Replacing an aged gasket promptly restores proper intake sealing and engine performance.

✅ Installation Tips:
1. Ensure the engine is cool, then remove the intake manifold mounting bolts.
2. Remove the old gasket and clean the mating surfaces on both the cylinder head and manifold (remove old sealant or debris).
3. Position the new gasket between the head and manifold, aligning with the locating pins or mounting holes.
4. Tighten the mounting bolts in a crisscross pattern to ensure even pressure.
5. Check that the installation is level, start the engine, and inspect for air leaks (use carburetor cleaner spray around the joint as a test).
We strongly recommend replacing this gasket whenever you change the intake manifold to eliminate air leak risks entirely.

⚠️ Important Notice: This product is a Yamaha 100 Intake Manifold Gasket, part number MIYP100-5090B. Designed for JOG 100cc LY149QMG and similar engines. Mounting holes: 50mm (center to center), Inner Diameter: 20mm. Images are for reference only; actual product may vary. We recommend replacing this gasket whenever you service or replace the intake manifold to prevent future air leak issues.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.

Tags: Inlet Pipe, Intake Manifold, Isolation, Manifold, Pipe