C100 Blinker Module Flasher

Brand: Mortch Motor
Product Code: MIC100-6051

Product Viewed: 372

Availability: In Stock

Weight: 0.02kg

0 reviews / Write a review

US$1.00 277 SOLD

Shipping To：

More Quotes

Turn Signal Flasher Relay

🔁 Flasher Relay · Turn Signal Relay · Blinker Relay · 12V Electronic Flasher

A direct replacement flasher relay compatible with most C100 models and similar small-displacement motorcycles, scooters, and ATVs.

📋 Product Overview

This is a 12V Turn Signal Flasher Relay, designed as a direct replacement for the original flasher unit in most C100 models, mopeds, scooters, and ATVs. It controls the flashing rhythm of the turn signals, ensuring reliable operation and proper visibility on the road.

The flasher relay works by intermittently connecting and disconnecting power to the turn signal bulbs, creating a steady on-off flashing pattern. This unit uses solid-state electronic circuitry for consistent flash rate regardless of bulb load variations, eliminating the issues common with older thermal flashers. When the original flasher relay fails due to age, corrosion, or electrical issues, this unit provides a simple plug-and-play replacement.

✨ Core Functions: Control turn signal flashing rhythm · Provide consistent flash rate · Replace failed original flasher · Plug-and-play installation · 12V DC operation

📐 Specifications

Type

Electronic Flasher Relay

Voltage

DC 12V

Terminals

2-Pin / 3-Pin (as original)

Flash Rate

70-90 flashes/min

Load Range

Up to 40W (2 x 21W bulbs)

Operating Type

Solid-state electronic

🛵 Compatible Models

This flasher relay is designed as a direct replacement for most C100 series motorcycles and similar small-displacement vehicles with 12V electrical systems:

Honda C100 / C102 / C105 / C110 / C114 / C117 - Cub series and derivatives
CT90 / CT110 / CT125 - Trail series
ST70 / Dax / CT70 - Mini trail models
Monkey / Z50 series - Mini motorcycles
Various mopeds, scooters, and ATVs with 12V turn signal systems
Most Chinese-made 50cc-150cc vehicles using standard flasher relays

📌 Compatibility Note: Please verify that your vehicle uses a 12V DC electrical system and that the original flasher relay matches the terminal configuration (2-pin or 3-pin) of this replacement unit.

✨ Product Features

🔌 Electronic Circuitry

Solid-state design ensures consistent flash rate regardless of bulb load or temperature changes.

🔄 No Load Sensitivity

Works reliably even if one bulb is burned out (will flash at a different rate to indicate failure, unlike thermal flashers).

⚡ Low Power Consumption

Efficient operation minimizes electrical load on the vehicle's charging system.

🛡️ Durable Construction

Encapsulated electronics resist vibration, moisture, and temperature extremes.

Direct Replacement: Fits in the original flasher relay location; no wiring modifications required.
Wide Compatibility: Works with standard automotive-type flasher sockets and wiring.
Quiet Operation: Electronic switching eliminates the clicking sound of older mechanical flashers (or provides a consistent click if audible type).
Plug-and-Play Installation: Simply remove the old flasher and install this unit in its place.

⚠️ Signs Your Flasher Relay Needs Replacement

Turn signals do not flash at all: Lights stay on constantly (no flashing) or do not illuminate at all.
Flashing rate is too fast or too slow: Rapid blinking (hyper-flash) or extremely slow, irregular flashing.
Inconsistent flashing: Flashing rhythm changes randomly or stops intermittently.
No clicking sound: When the turn signal switch is engaged, there is no audible clicking (for audible-type flashers).
Only one side works: One turn signal circuit functions normally while the other does not flash.
Flasher works intermittently: Flasher functions sometimes and fails at other times, especially when hot.

💡 Important Safety Note: A malfunctioning turn signal system reduces visibility to other drivers and is a safety hazard. Replace a faulty flasher relay promptly to ensure your turn signals operate reliably.

🔧 Installation Guide

1. Locate the original flasher relay: On most C100 models, it is typically under the seat, behind the side cover, or near the fuse box.
2. Remove the old flasher: Pull the flasher relay straight out of its socket. It may require a firm but gentle pull.
3. Check terminal configuration: Verify the replacement flasher has the same number of pins (2-pin or 3-pin) as the original.
4. Install the new flasher: Insert the new flasher relay into the socket, ensuring proper orientation. The pins should align with the socket terminals.
5. Test operation: Turn the ignition on and activate the turn signals to confirm they flash at a normal, consistent rate.
6. Secure the flasher: If the flasher is held by a clip or bracket, ensure it is properly seated.

🔍 Troubleshooting Tips

If turn signals still do not operate correctly after installing the new flasher relay:

Check the turn signal bulbs for proper wattage and ensure they are not burned out.
Inspect the turn signal switch for corrosion or poor contact.
Verify the flasher socket terminals are clean and provide good connection.
Check for damaged wiring or poor ground connections in the turn signal circuit.
Confirm the vehicle battery voltage is adequate (12V system with functioning charging).

⚠️ Important: If using LED turn signal bulbs, a standard flasher relay may not work properly. This flasher is designed for standard incandescent bulbs. For LED applications, an LED-compatible flasher relay or load resistors are required.

⚠️ Important Notice: This flasher relay is designed as a replacement for most C100 models and similar 12V vehicles with standard incandescent turn signal bulbs. Confirm your vehicle uses a 12V DC electrical system and that the terminal configuration matches your original flasher. For vehicles with LED turn signal bulbs, please use a dedicated LED-compatible flasher relay. If turn signal issues persist after replacement, inspect bulbs, wiring, and the turn signal switch. Product images are for reference only; please refer to the actual product.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.

Tags: Flasher, Indicator flasher unit, blinker module