Rear Swing Arm Bearing

Brand: Mortch Motor
Product Code: MICF5BY0-060120

Product Viewed: 22

Availability: In Stock

Weight: 0.15kg

0 reviews / Write a review

US$16.00

Shipping To：

More Quotes

🔧 CFMoto Rear Swing Arm Bearing

📦 Part Number: 5BY0-060120

⚙️ Rear Swing Arm Bearing · Suspension Joint Bearing · OEM Spec

📍 Installation Location: Rear suspension system / Swing arm to frame pivot point

✅ Single unit · Precision bearing · Direct fit · Compatible with multiple CFMoto SSV models

📋 Product Overview

This is a CFMoto OEM-spec Rear Swing Arm Bearing, part number 5BY0-060120, sold as a single unit. This joint bearing is a critical component of the rear suspension system, installed at the pivot point where the swing arm connects to the frame. It accommodates the swing arm's articulation relative to the frame while transmitting and absorbing complex loads from the rear wheels — playing a vital role in vehicle handling stability, ride comfort, and safety.

Over time, the original joint bearing may suffer from wear, corrosion, grease degradation, or impact damage under high loads, harsh terrain, and mud exposure — leading to play, noise, or binding that severely affects rear suspension performance and driving safety. Replacing with an OEM-spec joint bearing is essential to restore rear suspension precision and reliability.

✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Made from precision bearing steel, with dimensions, clearance, and lubrication requirements identical to the genuine part, ensuring a perfect replacement and reliable articulation performance.

📐 Specifications

🔖 Part Number: 5BY0-060120

🏷️ Product Name: Rear Swing Arm Bearing / Suspension Joint Bearing

📦 Packaging: Single unit

📍 Installation: Swing arm to frame pivot point

🧪 Material: Precision bearing steel

⚙️ Function: Articulation · Load bearing · Suspension flexibility

🚗 Vehicle Compatibility

This Rear Swing Arm Bearing (part number 5BY0-060120, single unit) fits the following CFMoto SSV models:

🏎️ SSV Series

2024-2026 CF1000STR-3L · ZForce 950 Sport-4
2023-2026 CF1000UTR-6(T1b) · ZForce 950 Sport
2020-2022 CF1000UTR-B · ZForce 1000 Sport
2023-2025 CF1000UTR-C · ZForce 1000 Sport
2025-2026 CF800SU-3 · ZForce 800 Sport
2026 CM1000SZ · Z10
2026 CM1000SZ-L · Z10-4

📌 Fitment Note: This rear swing arm bearing fits the swing arm to frame pivot point of the listed CFMoto SSV models. Sold as a single unit; multiple bearings may be required per vehicle. It is recommended to inspect and replace bearings when servicing the rear suspension system. If your specific model is not listed, please contact us with your VIN to confirm compatibility.

⚙️ Product Features

✅ OEM Original Spec: Manufactured to CFMoto original technical standards; dimensions, clearance, and lubrication requirements match the genuine part exactly.
🛡️ Precision Bearing Steel: Made from premium bearing steel with precision grinding and heat treatment for excellent wear resistance, impact resistance, and fatigue life.
🔧 Direct Fitment: Direct replacement for the original part — no modifications required.
💪 Smooth Articulation: Ensures the swing arm pivots smoothly relative to the frame for proper suspension kinematics and ride comfort.
🔄 Direct Replacement: Replaces worn, loose, corroded, or damaged original joint bearings.

✅ Typical signs you need to replace the Rear Swing Arm Bearing:
• Unusual noise from the rear suspension area (metal clunking or grinding) — especially on rough roads or during turns.
• Rear wheel wobble or unstable vehicle rear end — reduced handling feel.
• Noticeable play or excessive clearance at the bearing (detected by moving the rear wheel).
• Bearing shows corrosion, wear, or dried-out grease (visual inspection).
• Bearing is found to be worn beyond limits or damaged during service.
If any of these occur, inspect and replace the joint bearing promptly to ensure proper rear suspension operation.

✅ Installation Tips:
1. Confirm the bearing is the correct 5BY0-060120 matching the original.
2. Raise the vehicle with proper support and ensure the rear wheels are off the ground.
3. Remove the swing arm to frame mounting bolts and take out the old bearing.
4. Clean the bearing housing bore and mating surfaces, inspecting for damage or scoring.
5. Use a proper press tool to install the new bearing smoothly into the housing bore, ensuring it is fully seated.
6. Reinstall the swing arm mounting bolts and torque to OEM specifications.
7. Check that the swing arm articulates smoothly with no binding or excessive play.
Installation requires a press tool and mechanical skill; professional installation recommended.

⚠️ Important Note: This product is a CFMoto Rear Swing Arm Bearing, part number 5BY0-060120, sold as a single unit. Fits the listed CFMoto SSV models. Slight variations may occur between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may vary. Use a proper press tool for installation — avoid hammering to prevent bearing damage. Torque all bolts to OEM specifications.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.