CVT Case Plain Bearing, Blue

CFMoto CVT Case Plain Bearing | Including Linhai Code Cross-Reference

OEM Part Number: 0JY0-013102-00010 / 0JY0-013102-00020 | Linhai: 1BX-15423-10 / 1BX-15423-20

Compatible with CFMoto 400cc / 500cc / 600cc / 800cc / 1000cc models and multiple Linhai ATVs

Width: 24mm | Select by marking A (Red Thin) or B (Blue Thick)

This is a genuine CFMoto CVT case plain bearing (also known as a sliding bearing), used to support rotating shafts inside the CVT transmission. Available in two specifications:

• Red (Thin) Part Number 0JY0-013102-00010 | Linhai Code 38080 / 1BX-15423-10 Thickness +0.014~+0.019mm
• Blue (Thick) Part Number 0JY0-013102-00020 | Linhai Code 38081 / 1BX-15423-20 Thickness +0.019~+0.024mm

Selection Guide: If your CVT case is marked with "A", use the Red bearing; if marked with "B", use the Blue bearing. Width is uniformly 24mm. Manufactured to OEM specifications, ensuring installation accuracy and long-term durability.

🔍 How to Select the Correct Bearing:

Check the marking on your CVT case:

• Marking "A" → Use Red (Thin) Bearing (0JY0-013102-00010 / 1BX-15423-10)
• Marking "B" → Use Blue (Thick) Bearing (0JY0-013102-00020 / 1BX-15423-20)

If the marking is worn or unreadable, measure the old bearing thickness or contact customer service.

📌 Compatibility Note: This CVT case plain bearing is suitable for the engine series listed above, covering various CFMoto models from 400cc to 1000cc and multiple Linhai ATVs. Due to the large number of models, please be sure to select the correct specification (Red thin or Blue thick) based on the marking "A" or "B" on your vehicle's CVT case. If you have any questions, please provide your original part number or engine model for verification.

• Direct OEM Replacement: Exactly matches CFMoto part numbers 0JY0-013102-00010 (Red) and 0JY0-013102-00020 (Blue). Linhai equivalents 1BX-15423-10 / 1BX-15423-20.
• Precision Thickness Tolerances: Red +0.014~+0.019mm, Blue +0.019~+0.024mm, ensuring optimal clearance with the shaft journal.
• High-Quality Alloy Material: Made of high-strength wear-resistant alloy with special surface treatment, providing excellent fatigue resistance and anti-friction properties.
• Accurate Positioning: Standard 24mm width with locating lip ensures correct positioning during installation, preventing rotation.
• Supplied as a Set: Each set includes the required number of bearings to ensure matching consistency.

📑 Complete Part Number Cross-Reference:

Red CVT Case Plain Bearing: CFMoto 0JY0-013102-00010 | Linhai 38080 / 1BX-15423-10
Blue CVT Case Plain Bearing: CFMoto 0JY0-013102-00020 | Linhai 38081 / 1BX-15423-20
Width: 24mm | Function: CVT Transmission Rotating Shaft Support / Plain Bearing

This CVT case plain bearing is suitable for both CFMoto and Linhai platforms. It is a key component for supporting rotating shafts inside the CVT transmission, ensuring smooth drivetrain operation.

✅ Service Tip: Bearings are precision fit components. Replacement is typically required during engine overhaul, crankshaft repair, or when abnormal noise or low oil pressure occurs. When replacing, thoroughly clean the journal and bearing housing, and inspect the journal surface for damage. Ensure the bearing locating lip correctly engages the housing groove and apply clean engine oil. Tighten bearing cap bolts to the torque specified in the service manual.

⚠️ Installation Note: Before installation, confirm the case marking and select the correct bearing thickness. Keep the bearing and journal absolutely clean during installation. Use Plastigage to check that the oil clearance meets specifications. Use a torque wrench when tightening bolts, following a diagonal sequence in multiple steps to the specified torque. After installation, manually rotate the crankshaft/countershaft to check for smooth rotation without binding.