KYMCO Voltage Regulator for SUPERDINK 125/300 IE/X-CITING 300-500/PEOPLE 125-250-300

Brand: Mortch Motor
Product Code: MIREG-KYMCODINK300

Product Viewed: 442

Availability: In Stock

Weight: 0.28kg

Packing Size: 10.00 x 12.00 x 5.00cm

0 reviews / Write a review

US$22.50 15 SOLD
50 or more US$18.00

Shipping To：

More Quotes

🔧 KYMCO 12V 3-Phase Regulator/Rectifier

📦 Part Number: 31600-LDG7-900 / 31600-KED9-E10

⚙️ Voltage Regulator · 3-Phase Rectifier · OEM Specification

📍 Installation Position: Electrical System / Rectifier Mount

✅ 2-Pin & 3-Pin Rectangle Connectors · 3-Phase Regulator · Direct Replacement · Fits Multiple KYMCO Models

📋 Product Overview

This product is a KYMCO-specific 12V 3-phase voltage regulator/rectifier, part number 31600-LDG7-900 / 31600-KED9-E10. This regulator is a core component of the vehicle charging system, converting AC power from the 3-phase alternator to DC power for battery charging, while regulating voltage to protect the vehicle's electrical equipment from overvoltage damage.

This regulator features a 2-pin rectangle connector and a 3-pin rectangle connector (as shown in the image). Compatible with KYMCO PEOPLE 125, RACING 125/150, SUPERDINK 125, DINK 250, SUPERDINK 300, PEOPLE S 250, X-CITING 300/450/500, and other models.

Over time, the regulator may experience internal component aging, burnout, or poor heat dissipation, leading to charging system failure, battery discharge, dim lights, or electrical equipment damage. Timely replacement of a damaged regulator is critical to ensuring proper charging system operation.

✅ Quality Assurance: Manufactured strictly to original technical standards. Electrical parameters and mounting dimensions are fully consistent with original parts, ensuring perfect replacement and reliable voltage regulation.

📐 Specifications

🔖 Part Number: 31600-LDG7-900 / 31600-KED9-E10

⚡ Voltage: 12V

🔌 Phase: 3-Phase

📏 Length: 104mm

📏 Width: 75mm

📏 Thickness: 17mm

🔌 Connector Type: 2-Pin Rectangle + 3-Pin Rectangle

⚡ Type: 3-Phase Regulator/Rectifier

🔌 Connector Information

This regulator features the following connectors:

2-Pin Rectangle Connector — for alternator or vehicle wiring
3-Pin Rectangle Connector — for 3-phase alternator connection

📌 Verify that your original connectors match before installation (as shown in the image).

🏍️ Compatible Models

This regulator is compatible with the following KYMCO models (including but not limited to):

PEOPLE 125
RACING 125 / 150
SUPERDINK 125
DINK 250
SUPERDINK 300
PEOPLE S 250
X-CITING 300 / 450 / 500

📌 Fitment Note: This regulator is suitable for the KYMCO models listed above. Part number 31600-LDG7-900 / 31600-KED9-E10. If your model is not listed, please contact us for compatibility confirmation.

⚙️ Product Features

✅ OEM Specification: Manufactured strictly to original technical standards. Electrical parameters match original parts completely.
🛡️ 3-Phase Regulator: Designed specifically for 3-phase alternators for high rectification efficiency and stable voltage regulation.
🔧 Dedicated Connectors: 2-pin and 3-pin rectangle connectors for multiple KYMCO models.
💪 Good Heat Dissipation: Aluminum housing design for effective heat dissipation and extended service life.
🔄 Direct Replacement: Directly replaces damaged original regulators.

✅ Typical Signs That Regulator Replacement Is Needed:
• Frequent battery discharge, unable to charge properly.
• Dim or flickering headlight.
• Charging indicator light stays on abnormally.
• Regulator housing is excessively hot, deformed, or has a burning smell.
• Multimeter readings show abnormal charging voltage (too high or too low).
If you experience any of these symptoms, please inspect and replace the regulator promptly.

✅ Installation Tips:
1. Disconnect the negative battery cable before installation to prevent short circuits.
2. Remove the old regulator, noting wire connection positions and color markings.
3. Verify the 2-pin and 3-pin connectors match your original.
4. Clean the mounting area to ensure good heat sink contact.
5. Connect the wiring harness according to the original wiring diagram, ensuring secure connections.
6. Reconnect the battery, start the engine, and check the charging voltage.
Professional installation by a qualified technician is recommended.

⚠️ Important Notice: This product is a KYMCO 12V 3-phase regulator/rectifier, part number 31600-LDG7-900 / 31600-KED9-E10. Features 2-pin and 3-pin rectangle connectors. Fits PEOPLE 125, RACING 125/150, SUPERDINK 125, DINK 250, SUPERDINK 300, PEOPLE S 250, X-CITING 300/450/500, and other models. Minor variations may exist between production batches. If your specific model is not listed, please contact us for compatibility verification. Images are for reference only; actual product may vary.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.