CG Starter Motor Assy 9T

Brand: Mortch Motor
Product Code: MICG125-1090-9

Product Viewed: 247

Availability: In Stock

Weight: 1.37kg

0 reviews / Write a review

US$18.34 103 SOLD

Shipping To：

More Quotes

CG Starter Motor Assembly · 9 Teeth

🔧 Starter Motor · Electric Starter · 9T Gear · CG Series Parts

For CG125 · CG150 · CG200 Honda Style Engines · Motorcycles · ATVs

📋 Product Overview

This is the CG Starter Motor Assembly (9 Teeth), a high-quality replacement for the motorcycle's original starter motor. Designed for Honda-style CG series engines, suitable for CG125, CG150, CG200, and other displacement models.

The starter motor is the core component of the electric starting system. When the start switch is activated, the motor rotates, engaging the starter gear with the engine flywheel ring gear to drive the crankshaft and start the engine. This starter motor features a 9-tooth starter gear, matching OEM specifications for perfect engagement with the flywheel ring gear.

✨ Core Functions: Provide starting torque · Drive crankshaft rotation · Enable push-button start · Replace damaged original motor · Restore electric start function

📐 Specifications

Voltage

12V

Gear Teeth

9 Teeth

Power Rating

Standard CG Spec

Rotation Direction

Clockwise (CW)

Mounting Bolt Spacing

Standard CG Size

Displacement Range

125cc · 150cc · 200cc

Mounting Type

Bolt Mount (2 Holes)

Terminal Type

Stud Terminal

Engine Type

Honda Style CG Series

🏍️ Compatible Vehicles

This starter motor fits various vehicles equipped with Honda-style CG series engines, including but not limited to:

CG125 Motorcycles

CG150 Motorcycles

CG200 Motorcycles

Honda CG Series

ATVs / Quad Bikes

Trikes / Three-Wheelers

Dirt Bikes

💡 Compatibility Note: This starter motor features a 9-tooth drive gear, suitable for CG125, CG150, CG200, and other Honda-style CG engines. Before installation, verify that your original starter motor has 9 teeth and the mounting dimensions match.

⚠️ Starter Motor Failure Symptoms

💨 Common Symptoms

• No response when pressing start button (relay clicks but motor doesn't turn)
• Motor turns slowly, low cranking speed
• Motor spins but engine doesn't turn (starter clutch slipping)
• Unusual noise during starting (gear engagement issues)
• Motor overheats excessively
• Motor continues running after start

🔍 Possible Causes

• Worn or stuck carbon brushes
• Burned or shorted armature winding
• Failed overrunning clutch (one-way clutch)
• Worn or damaged starter gear
• Worn bearings causing rotor contact
• Demagnetized magnets causing low torque

⚠️ Important Note: Starter motor failure will prevent electric starting. If you experience the symptoms above, check battery voltage, starter relay, and starter motor. Replace the starter motor assembly if necessary.

✨ Product Features

9-Tooth Drive Gear: Features a 9-tooth starter gear matching OEM specifications for perfect engagement with the engine flywheel ring gear.
High Torque Output: Premium magnetic materials and precision windings provide ample starting torque for reliable cold starts.
Quality Carbon Brushes: High-wear-resistance carbon brushes for extended service life and reduced maintenance.
Precision Bearings: High-quality ball bearings or bushings for smooth, quiet operation.
OEM Specification: Manufactured to exact CG series engine factory specifications for a perfect replacement of damaged original motors.
Ready to Install: Supplied as a complete assembly — no disassembly or reassembly required before installation.

🔧 Installation Guide

1. Disconnect the negative battery terminal for safety.
2. Remove the starter motor positive cable and ground wire (if applicable), marking connections.
3. Remove the starter motor mounting bolts (typically 2 bolts) and remove the old starter motor.
4. Clean the engine mounting surface and inspect mounting holes and locating boss.
5. Apply a small amount of oil to the O-ring or gasket on the new starter motor (if present).
6. Position the new starter motor, ensuring the drive gear aligns correctly with the flywheel ring gear.
7. Install the mounting bolts and tighten to specified torque (do not over-tighten).
8. Connect the positive cable and ground wire, ensuring secure connections.
9. Reconnect the battery negative terminal and test starting function.
Tip: Ensure the starter motor's locating boss aligns with the engine's locating hole. Check battery voltage and starter relay condition before installation.

⚠️ Important Notice: This is the CG Starter Motor Assembly (9 Teeth), designed for CG125, CG150, CG200, and other Honda-style CG series engines. Fits motorcycles, ATVs, and more.
Spec Confirmation: Before purchasing, verify that your original starter motor has 9 teeth and the mounting dimensions match. Different engine displacements may use starter motors with different tooth counts — verify carefully.
Installation Note: Starter motor installation involves the electrical system. Professional installation is recommended. Ensure all connections are secure to prevent poor starting or electrical damage.
Related Checks: If starting issues persist after replacement, check battery charge, starter relay, and engine ground connection. Product images are for reference only; actual product may vary.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.